5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abel Vesa abel.vesa@linaro.org
[ Upstream commit 9c02aa24bf404a39ec509d9f50539056b9b128f7 ]
On SM8550, depending on the Qunipro, we can run with G5 or G4. For now, when the major version is 5 or above, we go with G5. Therefore, we need to specifically tell UFS HC that.
Signed-off-by: Abel Vesa abel.vesa@linaro.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufs-qcom.c | 8 ++++++-- drivers/scsi/ufs/ufs-qcom.h | 6 +++++- 2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index 45d21cb80289d..ef8d721022da5 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -242,6 +242,10 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) ufshcd_rmwl(host->hba, QUNIPRO_SEL, ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0, REG_UFS_CFG1); + + if (host->hw_ver.major == 0x05) + ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); + /* make sure above configuration is applied before we return */ mb(); } @@ -515,9 +519,9 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, mb(); }
- if (update_link_startup_timer) { + if (update_link_startup_timer && host->hw_ver.major != 0x5) { ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100), - REG_UFS_PA_LINK_STARTUP_TIMER); + REG_UFS_CFG0); /* * make sure that this configuration is applied before * we return diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h index 70bee1d1f1139..742f752d01d61 100644 --- a/drivers/scsi/ufs/ufs-qcom.h +++ b/drivers/scsi/ufs/ufs-qcom.h @@ -48,7 +48,8 @@ enum { REG_UFS_PA_ERR_CODE = 0xCC, /* On older UFS revisions, this register is called "RETRY_TIMER_REG" */ REG_UFS_PARAM0 = 0xD0, - REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8, + /* On older UFS revisions, this register is called "REG_UFS_PA_LINK_STARTUP_TIMER" */ + REG_UFS_CFG0 = 0xD8, REG_UFS_CFG1 = 0xDC, REG_UFS_CFG2 = 0xE0, REG_UFS_HW_VERSION = 0xE4, @@ -86,6 +87,9 @@ enum { #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x) (0x000 + x) #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x)
+/* bit definitions for REG_UFS_CFG0 register */ +#define QUNIPRO_G4_SEL BIT(5) + /* bit definitions for REG_UFS_CFG1 register */ #define QUNIPRO_SEL 0x1 #define UTP_DBG_RAMS_EN 0x20000