The changes are to make sure to check the operation status. Actually the flash write and erase error behavior is caused on our products. The flash is Macronix flash device MX29GL512FHT2I-11G used by our products. The patch series was separated for changes of flash write and erase. Since those were not depended each other at the time. But by additional changes the changes are related more as same way currently. So combine patch series for the flash write and erase changes as v6.
Signed-off-by: Tokunori Ikegami ikegami@allied-telesis.co.jp Reviewed-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com Cc: Chris Packham chris.packham@alliedtelesis.co.nz Cc: Brian Norris computersforpeace@gmail.com Cc: David Woodhouse dwmw2@infradead.org Cc: Boris Brezillon boris.brezillon@free-electrons.com Cc: Marek Vasut marek.vasut@gmail.com Cc: Richard Weinberger richard@nod.at Cc: Cyrille Pitchen cyrille.pitchen@wedev4u.fr Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org
Tokunori Ikegami (5): mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase one block to enable XIP once
drivers/mtd/chips/cfi_cmdset_0002.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-)