From: Dmitry Torokhov dmitry.torokhov@gmail.com
[ Upstream commit 5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]
Touch controllers need some time after receiving reset command for the firmware to finish re-initializing and be ready to respond to commands from the host. The driver already had handling for the post-reset delay for I2C and SPI transports, this change adds the handling to SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2 compatibility mode, so reset is actually issued by psmouse driver on the associated serio port, after which the control is passed to the RMI4 driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in 92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus mode"), but that resulted in an unwanted delay in "fast" reconnect handler for the serio port, so it was decided to revert the patch and have the delay being handled in the RMI4 driver, similar to the other transports.
Tested-by: Jeffery Miller jefferymiller@google.com Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/mouse/synaptics.c | 1 + drivers/input/rmi4/rmi_smbus.c | 50 ++++++++++++++++++--------------- 2 files changed, 29 insertions(+), 22 deletions(-)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index ffad142801b39..9513500ca7c00 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1751,6 +1751,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse, psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && !SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10); const struct rmi_device_platform_data pdata = { + .reset_delay_ms = 30, .sensor_pdata = { .sensor_type = rmi_sensor_touchpad, .axis_align.flip_y = true, diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c index 2407ea43de59b..f38bf9a5f599d 100644 --- a/drivers/input/rmi4/rmi_smbus.c +++ b/drivers/input/rmi4/rmi_smbus.c @@ -235,12 +235,29 @@ static void rmi_smb_clear_state(struct rmi_smb_xport *rmi_smb)
static int rmi_smb_enable_smbus_mode(struct rmi_smb_xport *rmi_smb) { - int retval; + struct i2c_client *client = rmi_smb->client; + int smbus_version; + + /* + * psmouse driver resets the controller, we only need to wait + * to give the firmware chance to fully reinitialize. + */ + if (rmi_smb->xport.pdata.reset_delay_ms) + msleep(rmi_smb->xport.pdata.reset_delay_ms);
/* we need to get the smbus version to activate the touchpad */ - retval = rmi_smb_get_version(rmi_smb); - if (retval < 0) - return retval; + smbus_version = rmi_smb_get_version(rmi_smb); + if (smbus_version < 0) + return smbus_version; + + rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d", + smbus_version); + + if (smbus_version != 2 && smbus_version != 3) { + dev_err(&client->dev, "Unrecognized SMB version %d\n", + smbus_version); + return -ENODEV; + }
return 0; } @@ -253,11 +270,10 @@ static int rmi_smb_reset(struct rmi_transport_dev *xport, u16 reset_addr) rmi_smb_clear_state(rmi_smb);
/* - * we do not call the actual reset command, it has to be handled in - * PS/2 or there will be races between PS/2 and SMBus. - * PS/2 should ensure that a psmouse_reset is called before - * intializing the device and after it has been removed to be in a known - * state. + * We do not call the actual reset command, it has to be handled in + * PS/2 or there will be races between PS/2 and SMBus. PS/2 should + * ensure that a psmouse_reset is called before initializing the + * device and after it has been removed to be in a known state. */ return rmi_smb_enable_smbus_mode(rmi_smb); } @@ -273,7 +289,6 @@ static int rmi_smb_probe(struct i2c_client *client, { struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev); struct rmi_smb_xport *rmi_smb; - int smbus_version; int error;
if (!pdata) { @@ -312,18 +327,9 @@ static int rmi_smb_probe(struct i2c_client *client, rmi_smb->xport.proto_name = "smb"; rmi_smb->xport.ops = &rmi_smb_ops;
- smbus_version = rmi_smb_get_version(rmi_smb); - if (smbus_version < 0) - return smbus_version; - - rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d", - smbus_version); - - if (smbus_version != 2 && smbus_version != 3) { - dev_err(&client->dev, "Unrecognized SMB version %d\n", - smbus_version); - return -ENODEV; - } + error = rmi_smb_enable_smbus_mode(rmi_smb); + if (error) + return error;
i2c_set_clientdata(client, rmi_smb);