Add tx term offset support to pcie qcom driver need in some revision of the ipq806x SoC. Ipq8064 needs tx term offset set to 7.
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan smuthayy@codeaurora.org Signed-off-by: Ansuel Smith ansuelsmth@gmail.com Cc: stable@vger.kernel.org # v4.5+ --- drivers/pci/controller/dwc/pcie-qcom.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 85313493d51b..2cd6d1456210 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -45,7 +45,13 @@ #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
#define PCIE20_PARF_PHY_CTRL 0x40 +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16) +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16) + #define PCIE20_PARF_PHY_REFCLK 0x4C +#define PHY_REFCLK_SSP_EN BIT(16) +#define PHY_REFCLK_USE_PAD BIT(12) + #define PCIE20_PARF_DBI_BASE_ADDR 0x168 #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 @@ -371,9 +377,18 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie) writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS); }
+ if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) { + /* set TX termination offset */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK; + val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + } + /* enable external reference clock */ val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); - val |= BIT(16); + val &= ~PHY_REFCLK_USE_PAD; + val |= PHY_REFCLK_SSP_EN; writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
/* wait for clock acquisition */