From: Robert Hancock robert.hancock@calian.com
[ Upstream commit 37291f60d0822f191748c2a54ce63b0bc669020f ]
TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was not preserving the existing register value for other lanes, so enabling the PHY in SGMII mode on one lane zeroed out the settings for all other lanes, causing other PS-GTR peripherals such as USB3 to malfunction.
Use xpsgtr_clr_set to only manipulate the desired bits in the register.
Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by: Robert Hancock robert.hancock@calian.com Acked-by: Michal Simek michal.simek@xilinx.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Link: https://lore.kernel.org/r/20220126001600.1592218-1-robert.hancock@calian.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/xilinx/phy-zynqmp.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c index 2b0f921b6ee3d..b8ccac6f31467 100644 --- a/drivers/phy/xilinx/phy-zynqmp.c +++ b/drivers/phy/xilinx/phy-zynqmp.c @@ -134,7 +134,8 @@ #define PROT_BUS_WIDTH_10 0x0 #define PROT_BUS_WIDTH_20 0x1 #define PROT_BUS_WIDTH_40 0x2 -#define PROT_BUS_WIDTH_SHIFT 2 +#define PROT_BUS_WIDTH_SHIFT(n) ((n) * 2) +#define PROT_BUS_WIDTH_MASK(n) GENMASK((n) * 2 + 1, (n) * 2)
/* Number of GT lanes */ #define NUM_LANES 4 @@ -443,12 +444,12 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy) static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy) { struct xpsgtr_dev *gtr_dev = gtr_phy->dev; + u32 mask = PROT_BUS_WIDTH_MASK(gtr_phy->lane); + u32 val = PROT_BUS_WIDTH_10 << PROT_BUS_WIDTH_SHIFT(gtr_phy->lane);
/* Set SGMII protocol TX and RX bus width to 10 bits. */ - xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH, - PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT)); - xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH, - PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT)); + xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val); + xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val);
xpsgtr_bypass_scrambler_8b10b(gtr_phy); }