6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Parker Newman pnewman@connecttech.com
[ Upstream commit 426046e2d62dd19533808661e912b8e8a9eaec16 ]
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register.
The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0.
Example dmesg errors when an ethernet cable is connected to MGBE1:
[ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 213.016116] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 213.030817] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 213.040528] pc : handle_softirqs+0x98/0x368 [ 213.046563] lr : __do_softirq+0x18/0x20 [ 213.051293] sp : ffff80008003bf50 [ 213.055839] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 213.067304] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 213.077014] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 213.087339] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 213.097313] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 213.107201] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 213.116651] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 213.127500] x8 : ffff8000827b3160 x7 : 0a37b344852820af x6 : 3f049caedd1ff608 [ 213.138002] x5 : cff7cfdbfaf31291 x4 : ffffce78ea277340 x3 : 00000000ffffde04 [ 213.150428] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 213.162063] Call trace: [ 213.165494] handle_softirqs+0x98/0x368 (P) [ 213.171256] __do_softirq+0x18/0x20 [ 213.177291] ____do_softirq+0x14/0x28 [ 213.182017] call_on_irq_stack+0x24/0x30 [ 213.186565] do_softirq_own_stack+0x20/0x30 [ 213.191815] __irq_exit_rcu+0x114/0x140 [ 213.196891] irq_exit_rcu+0x14/0x28 [ 213.202401] el1_interrupt+0x44/0xb8 [ 213.207741] el1h_64_irq_handler+0x14/0x20 [ 213.213519] el1h_64_irq+0x80/0x88 [ 213.217541] cpuidle_enter_state+0xc4/0x4a8 (P) [ 213.224364] cpuidle_enter+0x3c/0x58 [ 213.228653] cpuidle_idle_call+0x128/0x1c0 [ 213.233993] do_idle+0xe0/0xf0 [ 213.237928] cpu_startup_entry+0x3c/0x48 [ 213.243791] secondary_start_kernel+0xdc/0x120 [ 213.249830] __secondary_switched+0x74/0x78
This bug has existed since the dwmac-tegra driver was added in Dec 2022 (See Fixes tag below for commit hash).
The Tegra234 SOC has 4 MGBE controllers, however Nvidia's Developer Kit only uses MGBE0 which is why the bug was not found previously. Connect Tech has many products that use 2 (or more) MGBE controllers.
The solution is to read the controller's SID from the existing "iommus" device tree property. The 2nd field of the "iommus" device tree property is the controller's SID.
Device tree snippet from tegra234.dtsi showing MGBE1's "iommus" property:
smmu_niso0: iommu@12000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; ... }
/* MGBE1 */ ethernet@6900000 { compatible = "nvidia,tegra234-mgbe"; ... iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; ... }
Nvidia's arm-smmu driver reads the "iommus" property and stores the SID in the MGBE device's "fwspec" struct. The dwmac-tegra driver can access the SID using the tegra_dev_iommu_get_stream_id() helper function found in linux/iommu.h.
Calling tegra_dev_iommu_get_stream_id() should not fail unless the "iommus" property is removed from the device tree or the IOMMU is disabled.
While the Tegra234 SOC technically supports bypassing the IOMMU, it is not supported by the current firmware, has not been tested and not recommended. More detailed discussion with Thierry Reding from Nvidia linked below.
Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support") Link: https://lore.kernel.org/netdev/cover.1731685185.git.pnewman@connecttech.com Signed-off-by: Parker Newman pnewman@connecttech.com Reviewed-by: Andrew Lunn andrew@lunn.ch Acked-by: Thierry Reding treding@nvidia.com Link: https://patch.msgid.link/6fb97f32cf4accb4f7cf92846f6b60064ba0a3bd.1736284360... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-tegra.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-tegra.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-tegra.c index 6fdd94c8919e..2996bcdea9a2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-tegra.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-tegra.c @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only +#include <linux/iommu.h> #include <linux/platform_device.h> #include <linux/of.h> #include <linux/module.h> @@ -19,6 +20,8 @@ struct tegra_mgbe { struct reset_control *rst_mac; struct reset_control *rst_pcs;
+ u32 iommu_sid; + void __iomem *hv; void __iomem *regs; void __iomem *xpcs; @@ -50,7 +53,6 @@ struct tegra_mgbe { #define MGBE_WRAP_COMMON_INTR_ENABLE 0x8704 #define MAC_SBD_INTR BIT(2) #define MGBE_WRAP_AXI_ASID0_CTRL 0x8400 -#define MGBE_SID 0x6
static int __maybe_unused tegra_mgbe_suspend(struct device *dev) { @@ -84,7 +86,7 @@ static int __maybe_unused tegra_mgbe_resume(struct device *dev) writel(MAC_SBD_INTR, mgbe->regs + MGBE_WRAP_COMMON_INTR_ENABLE);
/* Program SID */ - writel(MGBE_SID, mgbe->hv + MGBE_WRAP_AXI_ASID0_CTRL); + writel(mgbe->iommu_sid, mgbe->hv + MGBE_WRAP_AXI_ASID0_CTRL);
value = readl(mgbe->xpcs + XPCS_WRAP_UPHY_STATUS); if ((value & XPCS_WRAP_UPHY_STATUS_TX_P_UP) == 0) { @@ -241,6 +243,12 @@ static int tegra_mgbe_probe(struct platform_device *pdev) if (IS_ERR(mgbe->xpcs)) return PTR_ERR(mgbe->xpcs);
+ /* get controller's stream id from iommu property in device tree */ + if (!tegra_dev_iommu_get_stream_id(mgbe->dev, &mgbe->iommu_sid)) { + dev_err(mgbe->dev, "failed to get iommu stream id\n"); + return -EINVAL; + } + res.addr = mgbe->regs; res.irq = irq;
@@ -346,7 +354,7 @@ static int tegra_mgbe_probe(struct platform_device *pdev) writel(MAC_SBD_INTR, mgbe->regs + MGBE_WRAP_COMMON_INTR_ENABLE);
/* Program SID */ - writel(MGBE_SID, mgbe->hv + MGBE_WRAP_AXI_ASID0_CTRL); + writel(mgbe->iommu_sid, mgbe->hv + MGBE_WRAP_AXI_ASID0_CTRL);
plat->flags |= STMMAC_FLAG_SERDES_UP_AFTER_PHY_LINKUP;