From: Douglas Anderson dianders@chromium.org
[ Upstream commit bd9f3dcf42d943b53190f99bcdbcfe98a56ac4cd ]
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
NOTE: while here, let's also remove the nonsensical "regulator-allow-set-load" on the fixed regulator "vreg_s4a_1p8".
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9...
Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file") Signed-off-by: Douglas Anderson dianders@chromium.org Reviewed-by: Andrew Halaney ahalaney@redhat.com Reviewed-by: Konrad Dybcio konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson andersson@kernel.org Link: https://lore.kernel.org/r/20220829094903.v2.1.Id59c32b560c4662d8b3697de2bd49... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index ba547ca9fc6b..ddb9cb182152 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
regulator-always-on; regulator-boot-on; - regulator-allow-set-load;
vin-supply = <&vreg_3p3>; }; @@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 { regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; };
vreg_l7a_1p8: ldo7 { @@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 { regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; };
vreg_l11a_0p8: ldo11 { @@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 { regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; };
vreg_l7c_1p8: ldo7 { @@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 { regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; };
vreg_l10c_3p3: ldo10 {