The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 36cae568404a298a19a6e8a3f18641075d4cab04 Mon Sep 17 00:00:00 2001
From: Kristian Evensen kristian.evensen@gmail.com Date: Thu, 13 Sep 2018 11:21:49 +0200 Subject: [PATCH] USB: serial: option: improve Quectel EP06 detection
The Quectel EP06 (and EM06/EG06) LTE modem supports updating the USB configuration, without the VID/PID or configuration number changing. When the configuration is updated and interfaces are added/removed, the interface numbers are updated. This causes our current code for matching EP06 not to work as intended, as the assumption about reserved interfaces no longer holds. If for example the diagnostic (first) interface is removed, option will (try to) bind to the QMI interface.
This patch improves EP06 detection by replacing the current match with two matches, and those matches check class, subclass and protocol as well as VID and PID. The diag interface exports class, subclass and protocol as 0xff. For the other serial interfaces, class is 0xff and subclass and protocol are both 0x0.
The modem can export the following devices and always in this order: diag, nmea, at, ppp. qmi and adb. This means that diag can only ever be interface 0, and interface numbers 1-5 should be marked as reserved. The three other serial devices can have interface numbers 0-3, but I have not marked any interfaces as reserved. The reason is that the serial devices are the only interfaces exported by the device where subclass and protocol is 0x0.
QMI exports the same class, subclass and protocol values as the diag interface. However, the two interfaces have different number of endpoints, QMI has three and diag two. I have added a check for number of interfaces if VID/PID matches the EP06, and we ignore the device if number of interfaces equals three (and subclass is set).
Signed-off-by: Kristian Evensen kristian.evensen@gmail.com Acked-by: Dan Williams dcbw@redhat.com [ johan: drop uneeded RSVD(5) for ADB ] Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0215b70c4efc..382feafbd127 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1081,8 +1081,9 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06), - .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), @@ -1985,6 +1986,7 @@ static int option_probe(struct usb_serial *serial, { struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; + struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; unsigned long device_flags = id->driver_info;
/* Never bind to the CD-Rom emulation interface */ @@ -1999,6 +2001,18 @@ static int option_probe(struct usb_serial *serial, if (device_flags & RSVD(iface_desc->bInterfaceNumber)) return -ENODEV;
+ /* + * Don't bind to the QMI device of the Quectel EP06/EG06/EM06. Class, + * subclass and protocol is 0xff for both the diagnostic port and the + * QMI interface, but the diagnostic port only has two endpoints (QMI + * has three). + */ + if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) && + dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06) && + iface_desc->bInterfaceSubClass && iface_desc->bNumEndpoints == 3) { + return -ENODEV; + } + /* Store the device flags so we can use them during attach. */ usb_set_serial_data(serial, (void *)device_flags);