From: Xiaowei Li xiaowei.li@simcom.com
[ Upstream commit 0b39b055b5b48cbbdf5746a1ca6e3f6b0221e537 ]
Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip. 0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9071 Rev= 5.15 S: Manufacturer=SIMCOM S: Product=SDXBAAGHA-IDP _SN:D744C4C5 S: SerialNumber=0123456789ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=none E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Xiaowei Li xiaowei.li@simcom.com Acked-by: Bjørn Mork bjorn@mork.no Link: https://patch.msgid.link/tencent_21D781FAA4969FEACA6ABB460362B52C9409@qq.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org ---
**YES**
This commit should be backported to stable kernel trees. Here's my detailed analysis:
## Rationale for Backporting:
1. **Stable kernel rules explicitly allow device ID additions**: According to Documentation/process/stable-kernel-rules.rst line 15, patches must "either fix a real bug that bothers people or just add a device ID." This commit clearly falls into the "add a device ID" category.
2. **Simple, low-risk change**: The commit adds exactly one line: ```c {QMI_QUIRK_SET_DTR(0x1e0e, 0x9071, 3)}, /* SIMCom 8230C ++ */ ``` This is a minimal change that only affects users with this specific hardware (vendor ID 0x1e0e, product ID 0x9071).
3. **Enables hardware that would otherwise not work**: Without this device ID entry, users with the SIMCom 8230C modem cannot use their hardware with the qmi_wwan driver. This directly impacts functionality for those users.
4. **Follows established patterns**: The commit uses `QMI_QUIRK_SET_DTR` macro, consistent with the existing SIMCom entry at line 1428: ```c {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */ ``` This shows the vendor has a history of requiring the DTR quirk for their devices.
5. **Historical precedent supports backporting**: Of the 5 similar commits analyzed, 4 were backported to stable: - Fibocom FG132 (YES) - MeiG Smart SRM825L (YES) - Telit FN912 compositions (YES) - Telit FN920C04 compositions (YES) - Quectel RG255C (NO)
The 80% backport rate for similar device ID additions suggests this type of change is generally considered appropriate for stable.
6. **No risk to existing functionality**: The change only adds support for a new device ID (0x9071) and doesn't modify any existing device support or core driver functionality.
The commit meets all criteria for stable backporting: it's obviously correct, tested (as evidenced by the detailed USB descriptor output in the commit message), small (1 line), and enables hardware support that users need.
drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index b4c0413c6522a..96656e56e809f 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1431,6 +1431,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x22de, 0x9051, 2)}, /* Hucom Wireless HM-211S/K */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */ + {QMI_QUIRK_SET_DTR(0x1e0e, 0x9071, 3)}, /* SIMCom 8230C ++ */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)}, /* Quectel EG95 */