6.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mukesh Ojha quic_mojha@quicinc.com
[ Upstream commit 79cb2cb8d89b7eca87e8dac031dadea4aeafeaa7 ]
SDI is enabled for most of the Qualcomm SoCs and as per commit ff4aa3bc9825 ("firmware: qcom_scm: disable SDI if required") it was recommended to disable SDI by mentioning it in device tree to avoid hang during watchdog or during reboot.
However, for some cases if download mode tcsr register already configured from boot firmware to collect dumps and if SDI is disabled via means of mentioning it in device tree we could still end up with dump collection. Disabling SDI alone is not completely enough to disable dump mode and we also need to zero out the bits download bits from tcsr register.
Current commit now, unconditionally call qcom_scm_set_download_mode() based on download_mode flag, at max if TCSR register is not mentioned or available for a SoC it will fallback to legacy way of setting download mode through command which may be no-ops or return error in case current firmware does not implements QCOM_SCM_INFO_IS_CALL_AVAIL so, at worst it does nothing if it fails.
It also does to call SDI disable call if dload mode is disabled, which looks fine to do as intention is to disable dump collection even if system crashes.
Fixes: ff4aa3bc9825 ("firmware: qcom_scm: disable SDI if required") Signed-off-by: Mukesh Ojha quic_mojha@quicinc.com Link: https://lore.kernel.org/r/20240708155332.4056479-1-quic_mojha@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/qcom/qcom_scm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 68f4df7e6c3c7..77dd831febf5b 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -1875,14 +1875,12 @@ static int qcom_scm_probe(struct platform_device *pdev) * will cause the boot stages to enter download mode, unless * disabled below by a clean shutdown/reboot. */ - if (download_mode) - qcom_scm_set_download_mode(true); - + qcom_scm_set_download_mode(download_mode);
/* * Disable SDI if indicated by DT that it is enabled by default. */ - if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled")) + if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled") || !download_mode) qcom_scm_disable_sdi();
/*