From: Ulf Hansson ulf.hansson@linaro.org
commit 83293386bc95cf5e9f0c0175794455835bd1cb4a upstream.
Processing of SDIO IRQs must obviously be prevented while the card is system suspended, otherwise we may end up trying to communicate with an uninitialized SDIO card.
Reports throughout the years shows that this is not only a theoretical problem, but a real issue. So, let's finally fix this problem, by keeping track of the state for the card and bail out before processing the SDIO IRQ, in case the card is suspended.
Cc: stable@vger.kernel.org Reported-by: Douglas Anderson dianders@chromium.org Tested-by: Douglas Anderson dianders@chromium.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mmc/core/sdio.c | 13 ++++++++++++- drivers/mmc/core/sdio_irq.c | 4 ++++ 2 files changed, 16 insertions(+), 1 deletion(-)
--- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -934,6 +934,10 @@ static int mmc_sdio_pre_suspend(struct m */ static int mmc_sdio_suspend(struct mmc_host *host) { + /* Prevent processing of SDIO IRQs in suspended state. */ + mmc_card_set_suspended(host->card); + cancel_delayed_work_sync(&host->sdio_irq_work); + mmc_claim_host(host);
if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) @@ -982,13 +986,20 @@ static int mmc_sdio_resume(struct mmc_ho err = sdio_enable_4bit_bus(host->card); }
- if (!err && host->sdio_irqs) { + if (err) + goto out; + + /* Allow SDIO IRQs to be processed again. */ + mmc_card_clr_suspended(host->card); + + if (host->sdio_irqs) { if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) wake_up_process(host->sdio_irq_thread); else if (host->caps & MMC_CAP_SDIO_IRQ) host->ops->enable_sdio_irq(host, 1); }
+out: mmc_release_host(host);
host->pm_flags &= ~MMC_PM_KEEP_POWER; --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -38,6 +38,10 @@ static int process_sdio_pending_irqs(str unsigned char pending; struct sdio_func *func;
+ /* Don't process SDIO IRQs if the card is suspended. */ + if (mmc_card_suspended(card)) + return 0; + /* * Optimization, if there is only 1 function interrupt registered * and we know an IRQ was signaled then call irq handler directly.