If a bridge is hot-added without any bus number available for its downstream bus, pci_hp_add_bridge() will fail. However, the driver proceeds regardless, and the kernel crashes.
This crash can be reproduced with the QEMU command: qemu-system-x86_64 -machine pc-q35-2.10 \ -kernel bzImage \ -drive "file=img,format=raw" \ -m 2048 -smp 2 -enable-kvm \ -append "console=ttyS0 root=/dev/sda" \ -nographic \ -device pcie-root-port,bus=pcie.0,id=rp1,slot=1,bus-reserve=0 \ -device pcie-pci-bridge,id=br1,bus=rp1
then hot-plug a bridge at runtime with the QEMU command: device_add pci-bridge,id=br2,bus=br1,chassis_nr=1,addr=1
and the kernel crashes:
shpchp 0000:01:00.0: Latch close on Slot(1-1) shpchp 0000:01:00.0: Button pressed on Slot(1-1) shpchp 0000:01:00.0: Card present on Slot(1-1) shpchp 0000:01:00.0: PCI slot #1-1 - powering on due to button press pci 0000:02:01.0: [1b36:0001] type 01 class 0x060400 conventional PCI bridge pci 0000:02:01.0: BAR 0 [mem 0x00000000-0x000000ff 64bit] pci 0000:02:01.0: PCI bridge to [bus 00] pci 0000:02:01.0: bridge window [io 0x0000-0x0fff] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] pci 0000:02:01.0: No bus number available for hot-added bridge
(note: kernel should abort hot-plugging right here)
pci 0000:02:01.0: BAR 0 [mem 0xfe600000-0xfe6000ff 64bit]: assigned shpchp 0000:01:00.0: PCI bridge to [bus 02] shpchp 0000:01:00.0: bridge window [io 0xc000-0xcfff] shpchp 0000:01:00.0: bridge window [mem 0xfe600000-0xfe7fffff] shpchp 0000:01:00.0: bridge window [mem 0xfe000000-0xfe1fffff 64bit pref] shpchp 0000:02:01.0: HPC vendor_id 1b36 device_id 1 ss_vid 0 ss_did 0 shpchp 0000:02:01.0: enabling device (0000 -> 0002) ACPI: _SB_.GSIE: Enabled at IRQ 20 BUG: kernel NULL pointer dereference, address: 00000000000000da PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 66 Comm: kworker/1:2 Not tainted 6.9.0-rc1-00001-g2e0239d47d75 #33 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: shpchp-1 shpchp_pushbutton_thread RIP: 0010:shpc_init+0x3fb/0x9d0 [stack dump and register dump cut out]
Fix this by aborting the hot-plug if pci_hp_add_bridge() fails.
Fixes: 7d01f70ac6f4 ("PCI: shpchp: use generic pci_hp_add_bridge()") Signed-off-by: Nam Cao namcao@linutronix.de Cc: Yinghai Lu yinghai@kernel.org Cc: stable@vger.kernel.org --- v2: - add more information to commit description - return 0 instead of -EINVAL - remove pci_stop_and_remove_bus_device()
drivers/pci/hotplug/shpchp_pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 36db0c3c4ea6..ca105aed7eee 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -48,8 +48,10 @@ int shpchp_configure_device(struct slot *p_slot) }
for_each_pci_bridge(dev, parent) { - if (PCI_SLOT(dev->devfn) == p_slot->device) - pci_hp_add_bridge(dev); + if (PCI_SLOT(dev->devfn) == p_slot->device) { + if (pci_hp_add_bridge(dev)) + goto out; + } }
pci_assign_unassigned_bridge_resources(bridge);