From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit 5611ec2b9814bc91f7b0a8d804c1fc152e2025d9 ]
After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes command"), SK hynix PC400 becomes very slow with the following error message:
[ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]
SK Hynix PC400 has a buggy firmware that treats NLB as max value instead of a range, so the NLB passed isn't a valid value to the firmware.
According to SK hynix there are three commands are affected: - Write Zeroes - Compare - Write Uncorrectable
Right now only Write Zeroes is implemented, so disable it completely on SK hynix PC400.
BugLink: https://bugs.launchpad.net/bugs/1872383 Cc: kyounghwan sohn kyounghwan.sohn@sk.com Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 10d65f27879fd..45e29c6c3234c 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3130,6 +3130,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_DEVICE(0x1cc1, 0x8201), /* ADATA SX8200PNP 512GB */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_IGNORE_DEV_SUBNQN, }, + { PCI_DEVICE(0x1c5c, 0x1504), /* SK Hynix PC400 */ + .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001), .driver_data = NVME_QUIRK_SINGLE_VECTOR },