Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Cc: stable@vger.kernel.org # 6.9 Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Johan Hovold johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 7406f1ad9c55..caae0c3d8c7a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -784,6 +784,12 @@ &mdss_dp3_phy { };
&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + status = "okay"; };
@@ -975,6 +981,29 @@ nvme_reg_en: nvme-reg-en-state { bias-disable; };
+ pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie6a_default: pcie6a-default-state { clkreq-n-pins { pins = "gpio153";