From: Pali Rohár pali@kernel.org
commit 661c399a651c11aaf83c45cbfe0b4a1fb7bc3179 upstream.
Current implementation of advk_pcie_link_up() is wrong as it marks also link disabled or hot reset states as link up.
Fix it by marking link up only to those states which are defined in PCIe Base specification 3.0, Table 4-14: Link Status Mapped to the LTSSM.
To simplify implementation, Define macros for every LTSSM state which aardvark hardware can return in CFG_REG register.
Fix also checking for link training according to the same Table 4-14. Define a new function advk_pcie_link_training() for this purpose.
Link: https://lore.kernel.org/r/20211005180952.6812-13-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Marek Behún kabel@kernel.org Cc: stable@vger.kernel.org Cc: Remi Pommarel repk@triplefau.lt Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/host/pci-aardvark.c | 71 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 67 insertions(+), 4 deletions(-)
--- a/drivers/pci/host/pci-aardvark.c +++ b/drivers/pci/host/pci-aardvark.c @@ -152,9 +152,50 @@ #define CFG_REG (LMI_BASE_ADDR + 0x0) #define LTSSM_SHIFT 24 #define LTSSM_MASK 0x3f -#define LTSSM_L0 0x10 #define RC_BAR_CONFIG 0x300
+/* LTSSM values in CFG_REG */ +enum { + LTSSM_DETECT_QUIET = 0x0, + LTSSM_DETECT_ACTIVE = 0x1, + LTSSM_POLLING_ACTIVE = 0x2, + LTSSM_POLLING_COMPLIANCE = 0x3, + LTSSM_POLLING_CONFIGURATION = 0x4, + LTSSM_CONFIG_LINKWIDTH_START = 0x5, + LTSSM_CONFIG_LINKWIDTH_ACCEPT = 0x6, + LTSSM_CONFIG_LANENUM_ACCEPT = 0x7, + LTSSM_CONFIG_LANENUM_WAIT = 0x8, + LTSSM_CONFIG_COMPLETE = 0x9, + LTSSM_CONFIG_IDLE = 0xa, + LTSSM_RECOVERY_RCVR_LOCK = 0xb, + LTSSM_RECOVERY_SPEED = 0xc, + LTSSM_RECOVERY_RCVR_CFG = 0xd, + LTSSM_RECOVERY_IDLE = 0xe, + LTSSM_L0 = 0x10, + LTSSM_RX_L0S_ENTRY = 0x11, + LTSSM_RX_L0S_IDLE = 0x12, + LTSSM_RX_L0S_FTS = 0x13, + LTSSM_TX_L0S_ENTRY = 0x14, + LTSSM_TX_L0S_IDLE = 0x15, + LTSSM_TX_L0S_FTS = 0x16, + LTSSM_L1_ENTRY = 0x17, + LTSSM_L1_IDLE = 0x18, + LTSSM_L2_IDLE = 0x19, + LTSSM_L2_TRANSMIT_WAKE = 0x1a, + LTSSM_DISABLED = 0x20, + LTSSM_LOOPBACK_ENTRY_MASTER = 0x21, + LTSSM_LOOPBACK_ACTIVE_MASTER = 0x22, + LTSSM_LOOPBACK_EXIT_MASTER = 0x23, + LTSSM_LOOPBACK_ENTRY_SLAVE = 0x24, + LTSSM_LOOPBACK_ACTIVE_SLAVE = 0x25, + LTSSM_LOOPBACK_EXIT_SLAVE = 0x26, + LTSSM_HOT_RESET = 0x27, + LTSSM_RECOVERY_EQUALIZATION_PHASE0 = 0x28, + LTSSM_RECOVERY_EQUALIZATION_PHASE1 = 0x29, + LTSSM_RECOVERY_EQUALIZATION_PHASE2 = 0x2a, + LTSSM_RECOVERY_EQUALIZATION_PHASE3 = 0x2b, +}; + /* PCIe core controller registers */ #define CTRL_CORE_BASE_ADDR 0x18000 #define CTRL_CONFIG_REG (CTRL_CORE_BASE_ADDR + 0x0) @@ -248,13 +289,35 @@ static inline u32 advk_readl(struct advk return readl(pcie->base + reg); }
-static int advk_pcie_link_up(struct advk_pcie *pcie) +static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie) { - u32 val, ltssm_state; + u32 val; + u8 ltssm_state;
val = advk_readl(pcie, CFG_REG); ltssm_state = (val >> LTSSM_SHIFT) & LTSSM_MASK; - return ltssm_state >= LTSSM_L0; + return ltssm_state; +} + +static inline bool advk_pcie_link_up(struct advk_pcie *pcie) +{ + /* check if LTSSM is in normal operation - some L* state */ + u8 ltssm_state = advk_pcie_ltssm_state(pcie); + return ltssm_state >= LTSSM_L0 && ltssm_state < LTSSM_DISABLED; +} + +static inline bool advk_pcie_link_training(struct advk_pcie *pcie) +{ + /* + * According to PCIe Base specification 3.0, Table 4-14: Link + * Status Mapped to the LTSSM is Link Training mapped to LTSSM + * Configuration and Recovery states. + */ + u8 ltssm_state = advk_pcie_ltssm_state(pcie); + return ((ltssm_state >= LTSSM_CONFIG_LINKWIDTH_START && + ltssm_state < LTSSM_L0) || + (ltssm_state >= LTSSM_RECOVERY_EQUALIZATION_PHASE0 && + ltssm_state <= LTSSM_RECOVERY_EQUALIZATION_PHASE3)); }
static int advk_pcie_wait_for_link(struct advk_pcie *pcie)