The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x b04f0d89e880bc2cca6a5c73cf287082c91878da # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025052400-sneer-rendering-46c3@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From b04f0d89e880bc2cca6a5c73cf287082c91878da Mon Sep 17 00:00:00 2001 From: Gabor Juhos j4g8y7@gmail.com Date: Fri, 9 May 2025 15:48:52 +0200 Subject: [PATCH] arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
The two alarm LEDs of on the uDPU board are stopped working since commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge GPIO controller. These pins are part of the 'spi_quad' pin group for which the 'spi' function is selected via the default pinctrl state of the 'spi' node. This is wrong however, since in order to allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected first by the pinctrl core before probing the spi driver, but then it gets overridden to 'gpio' implicitly via the devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the SPI subsystem, so the function of the pin group remains 'spi' which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is that the pinctrl state definition is wrong since its initial commit 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins' node to 'gpio' and move the pinctrl state definition from the 'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1 Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board") Signed-off-by: Gabor Juhos j4g8y7@gmail.com Signed-off-by: Imre Kaloz kaloz@openwrt.org Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi index 3a9b6907185d..242820845707 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi @@ -26,6 +26,8 @@ memory@0 {
leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>;
led-power1 { label = "udpu:green:power"; @@ -82,8 +84,6 @@ &sdhci0 {
&spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>;
flash@0 { compatible = "jedec,spi-nor"; @@ -108,6 +108,10 @@ partition@180000 { }; };
+&spi_quad_pins { + function = "gpio"; +}; + &pinctrl_nb { i2c2_recovery_pins: i2c2-recovery-pins { groups = "i2c2";