From: Vladimir Oltean olteanv@gmail.com
commit 7155c44624d061692b4c13aa8343f119c67d4fc0 upstream.
The difference between "fsl,etsec2-mdio" and "gianfar" has to do with the .get_tbipa function, which calculates the address of the TBIPA register automatically, if not explicitly specified. [ see drivers/net/ethernet/freescale/fsl_pq_mdio.c ]. On LS1021A, the TBIPA register is at offset 0x30 within the port register block, which is what the "gianfar" method of calculating addresses actually does.
Luckily, the bad "compatible" is inconsequential for ls1021a.dtsi, because the TBIPA register is explicitly specified via the second "reg" (<0x0 0x2d10030 0x0 0x4>), so the "get_tbipa" function is dead code. Nonetheless it's good to restore it to its correct value.
Background discussion: https://www.spinics.net/lists/stable/msg361156.html
Fixes: c7861adbe37f ("ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect") Reported-by: Pavel Machek pavel@denx.de Signed-off-by: Vladimir Oltean olteanv@gmail.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/arm/boot/dts/ls1021a.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -505,7 +505,7 @@ };
mdio0: mdio@2d24000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -513,7 +513,7 @@ };
mdio1: mdio@2d64000 { - compatible = "fsl,etsec2-mdio"; + compatible = "gianfar"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>;