From: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com
[ Upstream commit 42a57a47bb0c0f531321a7001972a3ca121409bd ]
Devicetree source is a description of hardware and hardware has only one block @20008000 which can be configured either as eMMC or SDHC. Having two node for different modes is an obscure, unusual and confusing way to configure it. Instead the board file is supposed to customize the block to its needs, e.g. to SDHC mode.
This fixes dtbs_check warning: arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: sdhc@20008000: $nodename:0: 'sdhc@20008000' does not match '^mmc(@.*)?$'
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../microchip/microchip-mpfs-icicle-kit.dts | 11 ++++++- .../boot/dts/microchip/microchip-mpfs.dtsi | 29 ++----------------- 2 files changed, 12 insertions(+), 28 deletions(-)
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts index be0d77624cf53..cce5eca31f257 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts @@ -56,8 +56,17 @@ &serial3 { status = "okay"; };
-&sdcard { +&mmc { status = "okay"; + + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + card-detect-delay = <200>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; };
&emac0 { diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index 446f41d6a87e9..b12fd594e7172 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -262,39 +262,14 @@ serial3: serial@20104000 { status = "disabled"; };
- emmc: mmc@20008000 { + /* Common node entry for emmc/sd */ + mmc: mmc@20008000 { compatible = "cdns,sd4hc"; reg = <0x0 0x20008000 0x0 0x1000>; interrupt-parent = <&plic>; interrupts = <88 89>; pinctrl-names = "default"; clocks = <&clkcfg 6>; - bus-width = <4>; - cap-mmc-highspeed; - mmc-ddr-3_3v; - max-frequency = <200000000>; - non-removable; - no-sd; - no-sdio; - voltage-ranges = <3300 3300>; - status = "disabled"; - }; - - sdcard: sdhc@20008000 { - compatible = "cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <88>; - pinctrl-names = "default"; - clocks = <&clkcfg 6>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - card-detect-delay = <200>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; max-frequency = <200000000>; status = "disabled"; };