From: Damien Le Moal damien.lemoal@opensource.wdc.com
[ Upstream commit fd6d0e376211d7ed759db96b0fbd9a1cee67d462 ]
Make sure that the __le32 fields of struct sata_cmd are manipulated after applying the correct endian conversion. That is, use cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field value. In particular, make sure that the calculations for the 4G boundary check are done using CPU endianness and *not* little endian values. With these fixes, many sparse warnings are removed.
While at it, fix some code identation and add blank lines after variable declarations and in some other places to make this code more readable.
Link: https://lore.kernel.org/r/20220220031810.738362-12-damien.lemoal@opensource.... Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.") Reviewed-by: Jack Wang jinpu.wang@ionos.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm80xx_hwi.c | 82 ++++++++++++++++++-------------- 1 file changed, 45 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 86c32e22f48e..0b4261735c03 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -4540,7 +4540,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, u32 q_index, cpu_id; struct sata_start_req sata_cmd; u32 hdr_tag, ncg_tag = 0; - u64 phys_addr, start_addr, end_addr; + u64 phys_addr, end_addr; u32 end_addr_high, end_addr_low; u32 ATAP = 0x0; u32 dir; @@ -4601,32 +4601,38 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd); phys_addr = ccb->ccb_dma_handle; - sata_cmd.enc_addr_low = lower_32_bits(phys_addr); - sata_cmd.enc_addr_high = upper_32_bits(phys_addr); + sata_cmd.enc_addr_low = + cpu_to_le32(lower_32_bits(phys_addr)); + sata_cmd.enc_addr_high = + cpu_to_le32(upper_32_bits(phys_addr)); sata_cmd.enc_esgl = cpu_to_le32(1 << 31); } else if (task->num_scatter == 1) { u64 dma_addr = sg_dma_address(task->scatter); - sata_cmd.enc_addr_low = lower_32_bits(dma_addr); - sata_cmd.enc_addr_high = upper_32_bits(dma_addr); + + sata_cmd.enc_addr_low = + cpu_to_le32(lower_32_bits(dma_addr)); + sata_cmd.enc_addr_high = + cpu_to_le32(upper_32_bits(dma_addr)); sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len); sata_cmd.enc_esgl = 0; + /* Check 4G Boundary */ - start_addr = cpu_to_le64(dma_addr); - end_addr = (start_addr + sata_cmd.enc_len) - 1; - end_addr_low = cpu_to_le32(lower_32_bits(end_addr)); - end_addr_high = cpu_to_le32(upper_32_bits(end_addr)); - if (end_addr_high != sata_cmd.enc_addr_high) { + end_addr = dma_addr + le32_to_cpu(sata_cmd.enc_len) - 1; + end_addr_low = lower_32_bits(end_addr); + end_addr_high = upper_32_bits(end_addr); + if (end_addr_high != le32_to_cpu(sata_cmd.enc_addr_high)) { pm8001_dbg(pm8001_ha, FAIL, "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n", - start_addr, sata_cmd.enc_len, + dma_addr, + le32_to_cpu(sata_cmd.enc_len), end_addr_high, end_addr_low); pm8001_chip_make_sg(task->scatter, 1, ccb->buf_prd); phys_addr = ccb->ccb_dma_handle; sata_cmd.enc_addr_low = - lower_32_bits(phys_addr); + cpu_to_le32(lower_32_bits(phys_addr)); sata_cmd.enc_addr_high = - upper_32_bits(phys_addr); + cpu_to_le32(upper_32_bits(phys_addr)); sata_cmd.enc_esgl = cpu_to_le32(1 << 31); } @@ -4637,7 +4643,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.enc_esgl = 0; } /* XTS mode. All other fields are 0 */ - sata_cmd.key_index_mode = 0x6 << 4; + sata_cmd.key_index_mode = cpu_to_le32(0x6 << 4); + /* set tweak values. Should be the start lba */ sata_cmd.twk_val0 = cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) | @@ -4663,31 +4670,31 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, phys_addr = ccb->ccb_dma_handle; sata_cmd.addr_low = lower_32_bits(phys_addr); sata_cmd.addr_high = upper_32_bits(phys_addr); - sata_cmd.esgl = cpu_to_le32(1 << 31); + sata_cmd.esgl = cpu_to_le32(1U << 31); } else if (task->num_scatter == 1) { u64 dma_addr = sg_dma_address(task->scatter); + sata_cmd.addr_low = lower_32_bits(dma_addr); sata_cmd.addr_high = upper_32_bits(dma_addr); sata_cmd.len = cpu_to_le32(task->total_xfer_len); sata_cmd.esgl = 0; + /* Check 4G Boundary */ - start_addr = cpu_to_le64(dma_addr); - end_addr = (start_addr + sata_cmd.len) - 1; - end_addr_low = cpu_to_le32(lower_32_bits(end_addr)); - end_addr_high = cpu_to_le32(upper_32_bits(end_addr)); + end_addr = dma_addr + le32_to_cpu(sata_cmd.len) - 1; + end_addr_low = lower_32_bits(end_addr); + end_addr_high = upper_32_bits(end_addr); if (end_addr_high != sata_cmd.addr_high) { pm8001_dbg(pm8001_ha, FAIL, "The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n", - start_addr, sata_cmd.len, + dma_addr, + le32_to_cpu(sata_cmd.len), end_addr_high, end_addr_low); pm8001_chip_make_sg(task->scatter, 1, ccb->buf_prd); phys_addr = ccb->ccb_dma_handle; - sata_cmd.addr_low = - lower_32_bits(phys_addr); - sata_cmd.addr_high = - upper_32_bits(phys_addr); - sata_cmd.esgl = cpu_to_le32(1 << 31); + sata_cmd.addr_low = lower_32_bits(phys_addr); + sata_cmd.addr_high = upper_32_bits(phys_addr); + sata_cmd.esgl = cpu_to_le32(1U << 31); } } else if (task->num_scatter == 0) { sata_cmd.addr_low = 0; @@ -4695,27 +4702,28 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.len = cpu_to_le32(task->total_xfer_len); sata_cmd.esgl = 0; } + /* scsi cdb */ sata_cmd.atapi_scsi_cdb[0] = cpu_to_le32(((task->ata_task.atapi_packet[0]) | - (task->ata_task.atapi_packet[1] << 8) | - (task->ata_task.atapi_packet[2] << 16) | - (task->ata_task.atapi_packet[3] << 24))); + (task->ata_task.atapi_packet[1] << 8) | + (task->ata_task.atapi_packet[2] << 16) | + (task->ata_task.atapi_packet[3] << 24))); sata_cmd.atapi_scsi_cdb[1] = cpu_to_le32(((task->ata_task.atapi_packet[4]) | - (task->ata_task.atapi_packet[5] << 8) | - (task->ata_task.atapi_packet[6] << 16) | - (task->ata_task.atapi_packet[7] << 24))); + (task->ata_task.atapi_packet[5] << 8) | + (task->ata_task.atapi_packet[6] << 16) | + (task->ata_task.atapi_packet[7] << 24))); sata_cmd.atapi_scsi_cdb[2] = cpu_to_le32(((task->ata_task.atapi_packet[8]) | - (task->ata_task.atapi_packet[9] << 8) | - (task->ata_task.atapi_packet[10] << 16) | - (task->ata_task.atapi_packet[11] << 24))); + (task->ata_task.atapi_packet[9] << 8) | + (task->ata_task.atapi_packet[10] << 16) | + (task->ata_task.atapi_packet[11] << 24))); sata_cmd.atapi_scsi_cdb[3] = cpu_to_le32(((task->ata_task.atapi_packet[12]) | - (task->ata_task.atapi_packet[13] << 8) | - (task->ata_task.atapi_packet[14] << 16) | - (task->ata_task.atapi_packet[15] << 24))); + (task->ata_task.atapi_packet[13] << 8) | + (task->ata_task.atapi_packet[14] << 16) | + (task->ata_task.atapi_packet[15] << 24))); }
/* Check for read log for failed drive and return */