From: Camel Guo camelg@axis.com
commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream.
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ...
Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo camelg@axis.com Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 1 + drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 19 +++++++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h @@ -128,6 +128,7 @@
#define NUM_DWMAC100_DMA_REGS 9 #define NUM_DWMAC1000_DMA_REGS 23 +#define NUM_DWMAC4_DMA_REGS 27
void dwmac_enable_dma_transmission(void __iomem *ioaddr); void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan); --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -21,10 +21,18 @@ #include "dwxgmac2.h"
#define REG_SPACE_SIZE 0x1060 +#define GMAC4_REG_SPACE_SIZE 0x116C #define MAC100_ETHTOOL_NAME "st_mac100" #define GMAC_ETHTOOL_NAME "st_gmac" #define XGMAC_ETHTOOL_NAME "st_xgmac"
+/* Same as DMA_CHAN_BASE_ADDR defined in dwmac4_dma.h + * + * It is here because dwmac_dma.h and dwmac4_dam.h can not be included at the + * same time due to the conflicting macro names. + */ +#define GMAC4_DMA_CHAN_BASE_ADDR 0x00001100 + #define ETHTOOL_DMA_OFFSET 55
struct stmmac_stats { @@ -413,6 +421,8 @@ static int stmmac_ethtool_get_regs_len(s
if (priv->plat->has_xgmac) return XGMAC_REGSIZE * 4; + else if (priv->plat->has_gmac4) + return GMAC4_REG_SPACE_SIZE; return REG_SPACE_SIZE; }
@@ -425,8 +435,13 @@ static void stmmac_ethtool_gregs(struct stmmac_dump_mac_regs(priv, priv->hw, reg_space); stmmac_dump_dma_regs(priv, priv->ioaddr, reg_space);
- if (!priv->plat->has_xgmac) { - /* Copy DMA registers to where ethtool expects them */ + /* Copy DMA registers to where ethtool expects them */ + if (priv->plat->has_gmac4) { + /* GMAC4 dumps its DMA registers at its DMA_CHAN_BASE_ADDR */ + memcpy(®_space[ETHTOOL_DMA_OFFSET], + ®_space[GMAC4_DMA_CHAN_BASE_ADDR / 4], + NUM_DWMAC4_DMA_REGS * 4); + } else if (!priv->plat->has_xgmac) { memcpy(®_space[ETHTOOL_DMA_OFFSET], ®_space[DMA_BUS_MODE / 4], NUM_DWMAC1000_DMA_REGS * 4);