From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
[ Upstream commit a7d3006be5ca7b04e4b84b5ceaae55a700e511bd ]
Tsens driver mentions that msm8976 data should be used for both msm8976 and msm8956 SoCs. This is not quite correct, as according to the vendor kernels, msm8976 should use standard slope values (3200), while msm8956 really uses the slope values found in the driver.
Add separate compatibility string for msm8956, move slope value overrides to the corresponding init function and use the standard compute_intercept_slope() function for both platforms.
Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Cc: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20230101194034.831222-7-dmitry.baryshkov@linaro.or... Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/qcom/tsens-v1.c | 56 ++++++++++++++++++--------------- drivers/thermal/qcom/tsens.c | 3 ++ drivers/thermal/qcom/tsens.h | 2 +- 3 files changed, 34 insertions(+), 27 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c index a795b08bb017e..9c443a2fb32ca 100644 --- a/drivers/thermal/qcom/tsens-v1.c +++ b/drivers/thermal/qcom/tsens-v1.c @@ -137,30 +137,6 @@ #define CAL_SEL_MASK 7 #define CAL_SEL_SHIFT 0
-static void compute_intercept_slope_8976(struct tsens_priv *priv, - u32 *p1, u32 *p2, u32 mode) -{ - int i; - - priv->sensor[0].slope = 3313; - priv->sensor[1].slope = 3275; - priv->sensor[2].slope = 3320; - priv->sensor[3].slope = 3246; - priv->sensor[4].slope = 3279; - priv->sensor[5].slope = 3257; - priv->sensor[6].slope = 3234; - priv->sensor[7].slope = 3269; - priv->sensor[8].slope = 3255; - priv->sensor[9].slope = 3239; - priv->sensor[10].slope = 3286; - - for (i = 0; i < priv->num_sensors; i++) { - priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - - (CAL_DEGC_PT1 * - priv->sensor[i].slope); - } -} - static int calibrate_v1(struct tsens_priv *priv) { u32 base0 = 0, base1 = 0; @@ -286,7 +262,7 @@ static int calibrate_8976(struct tsens_priv *priv) break; }
- compute_intercept_slope_8976(priv, p1, p2, mode); + compute_intercept_slope(priv, p1, p2, mode); kfree(qfprom_cdata);
return 0; @@ -360,6 +336,22 @@ static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), };
+static int __init init_8956(struct tsens_priv *priv) { + priv->sensor[0].slope = 3313; + priv->sensor[1].slope = 3275; + priv->sensor[2].slope = 3320; + priv->sensor[3].slope = 3246; + priv->sensor[4].slope = 3279; + priv->sensor[5].slope = 3257; + priv->sensor[6].slope = 3234; + priv->sensor[7].slope = 3269; + priv->sensor[8].slope = 3255; + priv->sensor[9].slope = 3239; + priv->sensor[10].slope = 3286; + + return init_common(priv); +} + static const struct tsens_ops ops_generic_v1 = { .init = init_common, .calibrate = calibrate_v1, @@ -372,13 +364,25 @@ struct tsens_plat_data data_tsens_v1 = { .fields = tsens_v1_regfields, };
+static const struct tsens_ops ops_8956 = { + .init = init_8956, + .calibrate = calibrate_8976, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_8956 = { + .num_sensors = 11, + .ops = &ops_8956, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; + static const struct tsens_ops ops_8976 = { .init = init_common, .calibrate = calibrate_8976, .get_temp = get_temp_tsens_valid, };
-/* Valid for both MSM8956 and MSM8976. */ struct tsens_plat_data data_8976 = { .num_sensors = 11, .ops = &ops_8976, diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index b5b136ff323f9..b191e19df93dc 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -983,6 +983,9 @@ static const struct of_device_id tsens_table[] = { }, { .compatible = "qcom,msm8939-tsens", .data = &data_8939, + }, { + .compatible = "qcom,msm8956-tsens", + .data = &data_8956, }, { .compatible = "qcom,msm8960-tsens", .data = &data_8960, diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 899af128855f7..7dd5fc2468945 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -594,7 +594,7 @@ extern struct tsens_plat_data data_8960; extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
/* TSENS v1 targets */ -extern struct tsens_plat_data data_tsens_v1, data_8976; +extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
/* TSENS v2 targets */ extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;