From: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org
commit a4f3407c41605d14f09e490045d0609990cd5d94 upstream.
As per register documentation, QCOM_WDT_ENABLE_IRQ which is BIT(1) of watchdog control register is wakeup interrupt enable bit and not related to bark interrupt at all, BIT(0) is used for that. So remove incorrect usage of this bit when supporting bark irq for pre-timeout notification. Currently with this bit set and bark interrupt specified, pre-timeout notification and/or watchdog reset/bite does not occur.
Fixes: 36375491a439 ("watchdog: qcom: support pre-timeout when the bark irq is available") Cc: stable@vger.kernel.org Signed-off-by: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org Reviewed-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Stephen Boyd swboyd@chromium.org Link: https://lore.kernel.org/r/20210126150241.10009-1-saiprakash.ranjan@codeauror... Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/watchdog/qcom-wdt.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-)
--- a/drivers/watchdog/qcom-wdt.c +++ b/drivers/watchdog/qcom-wdt.c @@ -22,7 +22,6 @@ enum wdt_reg { };
#define QCOM_WDT_ENABLE BIT(0) -#define QCOM_WDT_ENABLE_IRQ BIT(1)
static const u32 reg_offset_data_apcs_tmr[] = { [WDT_RST] = 0x38, @@ -63,16 +62,6 @@ struct qcom_wdt *to_qcom_wdt(struct watc return container_of(wdd, struct qcom_wdt, wdd); }
-static inline int qcom_get_enable(struct watchdog_device *wdd) -{ - int enable = QCOM_WDT_ENABLE; - - if (wdd->pretimeout) - enable |= QCOM_WDT_ENABLE_IRQ; - - return enable; -} - static irqreturn_t qcom_wdt_isr(int irq, void *arg) { struct watchdog_device *wdd = arg; @@ -91,7 +80,7 @@ static int qcom_wdt_start(struct watchdo writel(1, wdt_addr(wdt, WDT_RST)); writel(bark * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME)); writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME)); - writel(qcom_get_enable(wdd), wdt_addr(wdt, WDT_EN)); + writel(QCOM_WDT_ENABLE, wdt_addr(wdt, WDT_EN)); return 0; }