6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jean-Baptiste Maneyrol jean-baptiste.maneyrol@tdk.com
commit ef5f5e7b6f73f79538892a8be3a3bee2342acc9f upstream.
When multiple ODR switch happens during FIFO off, the change could not be taken into account if you get back to previous FIFO on value. For example, if you run sensor buffer at 50Hz, stop, change to 200Hz, then back to 50Hz and restart buffer, data will be timestamped at 200Hz. This due to testing against mult and not new_mult.
To prevent this, let's just run apply_odr automatically when FIFO is off. It will also simplify driver code.
Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr.
Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol jean-baptiste.maneyrol@tdk.com Link: https://patch.msgid.link/20241021-invn-inv-sensors-timestamp-fix-switch-fifo... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/common/inv_sensors/inv_sensors_timestamp.c | 4 ++++ drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 2 -- drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 3 --- drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 1 - 4 files changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c +++ b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c @@ -70,6 +70,10 @@ int inv_sensors_timestamp_update_odr(str if (mult != ts->mult) ts->new_mult = mult;
+ /* When FIFO is off, directly apply the new ODR */ + if (!fifo) + inv_sensors_timestamp_apply_odr(ts, 0, 0, 0); + return 0; } EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_update_odr, IIO_INV_SENSORS_TIMESTAMP); --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c @@ -200,7 +200,6 @@ static int inv_icm42600_accel_update_sca { struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); struct inv_icm42600_sensor_state *accel_st = iio_priv(indio_dev); - struct inv_sensors_timestamp *ts = &accel_st->ts; struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT; unsigned int fifo_en = 0; unsigned int sleep_temp = 0; @@ -229,7 +228,6 @@ static int inv_icm42600_accel_update_sca }
/* update data FIFO write */ - inv_sensors_timestamp_apply_odr(ts, 0, 0, 0); ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
out_unlock: --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c @@ -99,8 +99,6 @@ static int inv_icm42600_gyro_update_scan const unsigned long *scan_mask) { struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); - struct inv_icm42600_sensor_state *gyro_st = iio_priv(indio_dev); - struct inv_sensors_timestamp *ts = &gyro_st->ts; struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT; unsigned int fifo_en = 0; unsigned int sleep_gyro = 0; @@ -128,7 +126,6 @@ static int inv_icm42600_gyro_update_scan }
/* update data FIFO write */ - inv_sensors_timestamp_apply_odr(ts, 0, 0, 0); ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
out_unlock: --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -112,7 +112,6 @@ int inv_mpu6050_prepare_fifo(struct inv_ if (enable) { /* reset timestamping */ inv_sensors_timestamp_reset(&st->timestamp); - inv_sensors_timestamp_apply_odr(&st->timestamp, 0, 0, 0); /* reset FIFO */ d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST; ret = regmap_write(st->map, st->reg->user_ctrl, d);