From: Guenter Roeck linux@roeck-us.net
commit c1ffba305dbcf3fb9ca969c20a97acbddc38f8e9 upstream.
On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on. This results in the following warning from the regulator code.
WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210 unbalanced disables for usb_otg2_vbus Modules linked in: CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14) [<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c) [<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c) [<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc) [<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210) [<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8) [<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc) [<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4) [<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4) [<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc) [<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c) [<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8) [<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4) ...
Keeping track of the power enable state avoids the warning and traceback.
Fixes: c8679a2fb8dec ("usb: chipidea: host: add portpower override") Cc: Michael Grzeschik m.grzeschik@pengutronix.de Cc: Peter Chen peter.chen@freescale.com Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck linux@roeck-us.net Acked-by: Peter Chen peter.chen@nxp.com Link: https://lore.kernel.org/r/20191226155754.25451-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/chipidea/host.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -26,6 +26,7 @@ static int (*orig_bus_suspend)(struct us
struct ehci_ci_priv { struct regulator *reg_vbus; + bool enabled; };
static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) @@ -37,7 +38,7 @@ static int ehci_ci_portpower(struct usb_ int ret = 0; int port = HCS_N_PORTS(ehci->hcs_params);
- if (priv->reg_vbus) { + if (priv->reg_vbus && enable != priv->enabled) { if (port > 1) { dev_warn(dev, "Not support multi-port regulator control\n"); @@ -53,6 +54,7 @@ static int ehci_ci_portpower(struct usb_ enable ? "enable" : "disable", ret); return ret; } + priv->enabled = enable; }
if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {