From: Beniamin Bia beniamin.bia@analog.com
[ Upstream commit a6c4f77cb3b11f81077b53c4a38f21b92d41f21e ]
This patch set the correct value for oversampling maxItems. In the original example, appears 3 items for oversampling while the maxItems is set to 1, this patch fixes those issues.
Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml") Signed-off-by: Beniamin Bia beniamin.bia@analog.com Signed-off-by: Rob Herring robh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 6eb33207a1674..5117ad68a5840 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -82,7 +82,7 @@ properties: Must be the device tree identifier of the over-sampling mode pins. As the line is active high, it should be marked GPIO_ACTIVE_HIGH. - maxItems: 1 + maxItems: 3
adi,sw-mode: description: @@ -125,9 +125,9 @@ examples: adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH - &gpio 23 GPIO_ACTIVE_HIGH - &gpio 26 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, + <&gpio 23 GPIO_ACTIVE_HIGH>, + <&gpio 26 GPIO_ACTIVE_HIGH>; standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; adi,sw-mode; };