6.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulf Hansson ulf.hansson@linaro.org
commit f19c5a73e6f78d69efce66cfdce31148c76a61a6 upstream.
Userspace has currently no way of checking the internal R1 response error bits for some commands. This is a problem for some commands, like RPMB for example. Typically, we may detect that the busy completion has successfully ended, while in fact the card did not complete the requested operation.
To fix the problem, let's always poll with CMD13 for these commands and during the polling, let's also aggregate the R1 response bits. Before completing the ioctl request, let's propagate the R1 response bits too.
Reviewed-by: Avri Altman avri.altman@wdc.com Co-developed-by: Christian Loehle christian.loehle@arm.com Signed-off-by: Christian Loehle christian.loehle@arm.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230913112921.553019-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/core/block.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-)
--- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -179,6 +179,7 @@ static void mmc_blk_rw_rq_prep(struct mm struct mmc_queue *mq); static void mmc_blk_hsq_req_done(struct mmc_request *mrq); static int mmc_spi_err_check(struct mmc_card *card); +static int mmc_blk_busy_cb(void *cb_data, bool *busy);
static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) { @@ -470,7 +471,7 @@ static int __mmc_blk_ioctl_cmd(struct mm struct mmc_data data = {}; struct mmc_request mrq = {}; struct scatterlist sg; - bool r1b_resp, use_r1b_resp = false; + bool r1b_resp; unsigned int busy_timeout_ms; int err; unsigned int target_part; @@ -551,8 +552,7 @@ static int __mmc_blk_ioctl_cmd(struct mm busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS; r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B; if (r1b_resp) - use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd, - busy_timeout_ms); + mmc_prepare_busy_cmd(card->host, &cmd, busy_timeout_ms);
mmc_wait_for_req(card->host, &mrq); memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp)); @@ -605,19 +605,28 @@ static int __mmc_blk_ioctl_cmd(struct mm if (idata->ic.postsleep_min_us) usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
- /* No need to poll when using HW busy detection. */ - if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) - return 0; - if (mmc_host_is_spi(card->host)) { if (idata->ic.write_flag || r1b_resp || cmd.flags & MMC_RSP_SPI_BUSY) return mmc_spi_err_check(card); return err; } - /* Ensure RPMB/R1B command has completed by polling with CMD13. */ - if (idata->rpmb || r1b_resp) - err = mmc_poll_for_busy(card, busy_timeout_ms, false, - MMC_BUSY_IO); + + /* + * Ensure RPMB, writes and R1B responses are completed by polling with + * CMD13. Note that, usually we don't need to poll when using HW busy + * detection, but here it's needed since some commands may indicate the + * error through the R1 status bits. + */ + if (idata->rpmb || idata->ic.write_flag || r1b_resp) { + struct mmc_blk_busy_data cb_data = { + .card = card, + }; + + err = __mmc_poll_for_busy(card->host, 0, busy_timeout_ms, + &mmc_blk_busy_cb, &cb_data); + + idata->ic.response[0] = cb_data.status; + }
return err; }