From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 778a0cbef5fb76bf506f84938517bb77e7a1c478 ]
The setting from the cirrus,ts-inv property should be applied to the TIP_SENSE_INV bit, as this is the one that actually affects the jack detect block. The TS_INV bit only swaps the meaning of the PLUG and UNPLUG interrupts and should always be 1 for the interrupts to have the normal meaning.
Due to some misunderstanding the driver had been implemented to configure the TS_INV bit based on the jack switch polarity. This made the interrupts behave the correct way around, but left the jack detect block, button detect and analogue circuits always interpreting an open switch as unplugged.
The signal chain inside the codec is:
SENSE pin -> TIP_SENSE_INV -> TS_INV -> (invert) -> interrupts | v Jack detect, button detect and analog control
As the TIP_SENSE_INV already performs the necessary inversion the TS_INV bit never needs to change. It must always be 1 to yield the expected interrupt behaviour.
Some extra confusion has arisen because of the additional invert in the interrupt path, meaning that a value applied to the TS_INV bit produces the opposite effect of applying it to the TIP_SENSE_INV bit. The ts-inv property has therefore always had the opposite effect to what might be expected (0 = inverted, 1 = not inverted). To maintain the meaning of the ts-inv property it must be inverted when applied to TIP_SENSE_INV.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20211028140902.11786-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 6034e439d3132..762d9de73dbc2 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -1684,12 +1684,15 @@ static void cs42l42_setup_hs_type_detect(struct cs42l42_private *cs42l42) (1 << CS42L42_HS_CLAMP_DISABLE_SHIFT));
/* Enable the tip sense circuit */ + regmap_update_bits(cs42l42->regmap, CS42L42_TSENSE_CTL, + CS42L42_TS_INV_MASK, CS42L42_TS_INV_MASK); + regmap_update_bits(cs42l42->regmap, CS42L42_TIPSENSE_CTL, CS42L42_TIP_SENSE_CTRL_MASK | CS42L42_TIP_SENSE_INV_MASK | CS42L42_TIP_SENSE_DEBOUNCE_MASK, (3 << CS42L42_TIP_SENSE_CTRL_SHIFT) | - (0 << CS42L42_TIP_SENSE_INV_SHIFT) | + (!cs42l42->ts_inv << CS42L42_TIP_SENSE_INV_SHIFT) | (2 << CS42L42_TIP_SENSE_DEBOUNCE_SHIFT));
/* Save the initial status of the tip sense */ @@ -1733,10 +1736,6 @@ static int cs42l42_handle_device_data(struct device *dev, cs42l42->ts_inv = CS42L42_TS_INV_DIS; }
- regmap_update_bits(cs42l42->regmap, CS42L42_TSENSE_CTL, - CS42L42_TS_INV_MASK, - (cs42l42->ts_inv << CS42L42_TS_INV_SHIFT)); - ret = device_property_read_u32(dev, "cirrus,ts-dbnc-rise", &val); if (!ret) { switch (val) {