From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit e691f9282a89e24a8e87cdb91a181c6283ee5124 ]
In the new behavior, the sja1105 driver expects there to be explicit RGMII delays present on the fixed-link ports, otherwise it will complain that it falls back to legacy behavior, which is to apply RGMII delays incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to not apply delays in any direction (mostly because the SJA1105T can't do that, so this board uses PCB traces). To preserve that but also silence the driver, use explicit delays of 0 ns. The delay information from the phy-mode is ignored by new kernels (it's still RGMII as long as it's "rgmii*" something), and the explicit {rx,tx}-internal-delay-ps properties are ignored by old kernels, so the change works both ways.
Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/ls1021a-tsn.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index aca78b5eddf20..194748737724c 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -90,6 +90,8 @@ port@4 { /* Internal port connected to eth2 */ ethernet = <&enet2>; phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; reg = <4>;
fixed-link {