Hello,
We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to:
Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 0df021b2e841 - Linux 4.19.47
The results of these automated tests are provided below.
Overall result: PASSED Merge: OK Compile: OK Tests: OK
Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective.
,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________
Merge testing -------------
We cloned this repository and checked out the following commit:
Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 0df021b2e841 - Linux 4.19.47
We then merged the patchset with `git am`:
bonding-802.3ad-fix-slave-link-initialization-transition-states.patch cxgb4-offload-vlan-flows-regardless-of-vlan-ethtype.patch inet-switch-ip-id-generator-to-siphash.patch ipv4-igmp-fix-another-memory-leak-in-igmpv3_del_delrec.patch ipv4-igmp-fix-build-error-if-config_ip_multicast.patch ipv6-consider-sk_bound_dev_if-when-binding-a-raw-socket-to-an-address.patch ipv6-fix-redirect-with-vrf.patch llc-fix-skb-leak-in-llc_build_and_send_ui_pkt.patch net-dsa-mv88e6xxx-fix-handling-of-upper-half-of-stats_type_port.patch net-fec-fix-the-clk-mismatch-in-failed_reset-path.patch net-gro-fix-use-after-free-read-in-napi_gro_frags.patch net-mvneta-fix-err-code-path-of-probe.patch net-mvpp2-fix-bad-mvpp2_txq_sched_token_cntr_reg-queue-value.patch net-phy-marvell10g-report-if-the-phy-fails-to-boot-firmware.patch net-sched-don-t-use-tc_action-order-during-action-dump.patch net-stmmac-fix-reset-gpio-free-missing.patch usbnet-fix-kernel-crash-after-disconnect.patch net-mlx5-avoid-double-free-in-fs-init-error-unwinding-path.patch tipc-avoid-copying-bytes-beyond-the-supplied-data.patch net-mlx5-allocate-root-ns-memory-using-kzalloc-to-match-kfree.patch net-mlx5e-disable-rxhash-when-cqe-compress-is-enabled.patch net-stmmac-dma-channel-control-register-need-to-be-init-first.patch bnxt_en-fix-aggregation-buffer-leak-under-oom-condition.patch net-tls-fix-state-removal-with-feature-flags-off.patch net-tls-don-t-ignore-netdev-notifications-if-no-tls-features.patch
Compile testing ---------------
We compiled the kernel for 4 architectures:
aarch64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aa... kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aa...
ppc64le: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-pp... kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-pp...
s390x: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390... kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390...
x86_64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86... kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86...
Hardware testing ----------------
We booted each kernel and ran the following tests:
aarch64: Host 1: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1]
Host 2: ✅ Boot test [0] ✅ LTP lite [2] ✅ AMTU (Abstract Machine Test Utility) [3] ✅ Ethernet drivers sanity [4] ✅ audit: audit testsuite test [5] ✅ httpd: mod_ssl smoke sanity [6] ✅ iotop: sanity [7] ✅ tuned: tune-processes-through-perf [8] ✅ stress: stress-ng [9] 🚧 ✅ Networking socket: fuzz [10] 🚧 ✅ Networking: igmp conformance test [11] 🚧 ✅ Networking route: pmtu [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13]
ppc64le: Host 1: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1]
Host 2: ✅ Boot test [0] ✅ LTP lite [2] ✅ AMTU (Abstract Machine Test Utility) [3] ✅ Ethernet drivers sanity [4] ✅ audit: audit testsuite test [5] ✅ httpd: mod_ssl smoke sanity [6] ✅ iotop: sanity [7] ✅ tuned: tune-processes-through-perf [8] ✅ stress: stress-ng [9] 🚧 ✅ Networking socket: fuzz [10] 🚧 ✅ Networking route: pmtu [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13]
s390x: Host 1: ✅ Boot test [0] ✅ LTP lite [2] ✅ Ethernet drivers sanity [4] ✅ audit: audit testsuite test [5] ✅ httpd: mod_ssl smoke sanity [6] ✅ iotop: sanity [7] ✅ tuned: tune-processes-through-perf [8] ✅ stress: stress-ng [9] 🚧 ✅ Networking socket: fuzz [10] 🚧 ✅ Networking: igmp conformance test [11] 🚧 ✅ Networking route: pmtu [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13]
Host 2: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1]
x86_64: Host 1: ✅ Boot test [0] ✅ LTP lite [2] ✅ AMTU (Abstract Machine Test Utility) [3] ✅ Ethernet drivers sanity [4] ✅ audit: audit testsuite test [5] ✅ httpd: mod_ssl smoke sanity [6] ✅ iotop: sanity [7] ✅ tuned: tune-processes-through-perf [8] ✅ stress: stress-ng [9] 🚧 ✅ Networking socket: fuzz [10] 🚧 ✅ Networking: igmp conformance test [11] 🚧 ✅ Networking route: pmtu [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13]
Host 2: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1]
Test source: 💚 Pull requests are welcome for new tests or improvements to existing tests! [0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/... [1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/sel... [2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/... [3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu [4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/d... [5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audi... [6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/http... [7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/ioto... [8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tune... [9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#stress/stress... [10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/s... [11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/ig... [12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/r... [13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/r...
Waived tests (marked with 🚧) ----------------------------- This test run included waived tests. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed.