From: Nick Child nnac123@linux.ibm.com
commit 6db541ae279bd4e76dbd939e5fbf298396166242 upstream.
If a login request fails, the recovery process should be protected against parallel resets. It is a known issue that freeing and registering CRQ's in quick succession can result in a failover CRQ from the VIOS. Processing a failover during login recovery is dangerous for two reasons: 1. This will result in two parallel initialization processes, this can cause serious issues during login. 2. It is possible that the failover CRQ is received but never executed. We get notified of a pending failover through a transport event CRQ. The reset is not performed until a INIT CRQ request is received. Previously, if CRQ init fails during login recovery, then the ibmvnic irq is freed and the login process returned error. If failover_pending is true (a transport event was received), then the ibmvnic device would never be able to process the reset since it cannot receive the CRQ_INIT request due to the irq being freed. This leaved the device in a inoperable state.
Therefore, the login failure recovery process must be hardened against these possible issues. Possible failovers (due to quick CRQ free and init) must be avoided and any issues during re-initialization should be dealt with instead of being propagated up the stack. This logic is similar to that of ibmvnic_probe().
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests") Signed-off-by: Nick Child nnac123@linux.ibm.com Reviewed-by: Simon Horman horms@kernel.org Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/ibm/ibmvnic.c | 70 +++++++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 22 deletions(-)
--- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -115,6 +115,7 @@ static void ibmvnic_tx_scrq_clean_buffer static void free_long_term_buff(struct ibmvnic_adapter *adapter, struct ibmvnic_long_term_buff *ltb); static void ibmvnic_disable_irqs(struct ibmvnic_adapter *adapter); +static void flush_reset_queue(struct ibmvnic_adapter *adapter);
struct ibmvnic_stat { char name[ETH_GSTRING_LEN]; @@ -1316,8 +1317,8 @@ static const char *adapter_state_to_stri
static int ibmvnic_login(struct net_device *netdev) { + unsigned long flags, timeout = msecs_to_jiffies(20000); struct ibmvnic_adapter *adapter = netdev_priv(netdev); - unsigned long timeout = msecs_to_jiffies(20000); int retry_count = 0; int retries = 10; bool retry; @@ -1382,6 +1383,7 @@ static int ibmvnic_login(struct net_devi "SCRQ irq initialization failed\n"); return rc; } + /* Default/timeout error handling, reset and start fresh */ } else if (adapter->init_done_rc) { netdev_warn(netdev, "Adapter login failed, init_done_rc = %d\n", adapter->init_done_rc); @@ -1397,29 +1399,53 @@ partial_reset: "Freeing and re-registering CRQs before attempting to login again\n"); retry = true; adapter->init_done_rc = 0; - retry_count++; release_sub_crqs(adapter, true); - reinit_init_done(adapter); - release_crq_queue(adapter); - /* If we don't sleep here then we risk an unnecessary - * failover event from the VIOS. This is a known VIOS - * issue caused by a vnic device freeing and registering - * a CRQ too quickly. + /* Much of this is similar logic as ibmvnic_probe(), + * we are essentially re-initializing communication + * with the server. We really should not run any + * resets/failovers here because this is already a form + * of reset and we do not want parallel resets occurring */ - msleep(1500); - rc = init_crq_queue(adapter); - if (rc) { - netdev_err(netdev, "login recovery: init CRQ failed %d\n", - rc); - return -EIO; - } - - rc = ibmvnic_reset_init(adapter, false); - if (rc) { - netdev_err(netdev, "login recovery: Reset init failed %d\n", - rc); - return -EIO; - } + do { + reinit_init_done(adapter); + /* Clear any failovers we got in the previous + * pass since we are re-initializing the CRQ + */ + adapter->failover_pending = false; + release_crq_queue(adapter); + /* If we don't sleep here then we risk an + * unnecessary failover event from the VIOS. + * This is a known VIOS issue caused by a vnic + * device freeing and registering a CRQ too + * quickly. + */ + msleep(1500); + /* Avoid any resets, since we are currently + * resetting. + */ + spin_lock_irqsave(&adapter->rwi_lock, flags); + flush_reset_queue(adapter); + spin_unlock_irqrestore(&adapter->rwi_lock, + flags); + + rc = init_crq_queue(adapter); + if (rc) { + netdev_err(netdev, "login recovery: init CRQ failed %d\n", + rc); + return -EIO; + } + + rc = ibmvnic_reset_init(adapter, false); + if (rc) + netdev_err(netdev, "login recovery: Reset init failed %d\n", + rc); + /* IBMVNIC_CRQ_INIT will return EAGAIN if it + * fails, since ibmvnic_reset_init will free + * irq's in failure, we won't be able to receive + * new CRQs so we need to keep trying. probe() + * handles this similarly. + */ + } while (rc == -EAGAIN && retry_count++ < retries); } } while (retry);