From: Luiz Angelo Daros de Luca luizluca@gmail.com
This switch family can have up to 8 ports {0..7}. However, INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3, dropping the most significant bit during indirect register reads and writes. Reading or writing ports 5, 6, and 7 registers was actually manipulating, respectively, ports 0, 1, and 2 registers.
rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater than 7.
Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by: Luiz Angelo Daros de Luca luizluca@gmail.com --- drivers/net/dsa/rtl8365mb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/rtl8365mb.c b/drivers/net/dsa/rtl8365mb.c index baaae97283c5..f4414ac74b61 100644 --- a/drivers/net/dsa/rtl8365mb.c +++ b/drivers/net/dsa/rtl8365mb.c @@ -107,6 +107,7 @@ #define RTL8365MB_LEARN_LIMIT_MAX_8365MB_VC 2112
/* Family-specific data and limits */ +#define RTL8365MB_PHYADDRMAX 7 #define RTL8365MB_NUM_PHYREGS 32 #define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1) #define RTL8365MB_MAX_NUM_PORTS (RTL8365MB_CPU_PORT_NUM_8365MB_VC + 1) @@ -176,7 +177,7 @@ #define RTL8365MB_INDIRECT_ACCESS_STATUS_REG 0x1F01 #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG 0x1F02 #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK GENMASK(4, 0) -#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(6, 5) +#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(7, 5) #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK GENMASK(11, 8) #define RTL8365MB_PHY_BASE 0x2000 #define RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG 0x1F03 @@ -679,6 +680,8 @@ static int rtl8365mb_phy_read(struct realtek_smi *smi, int phy, int regnum) u16 val; int ret;
+ if (phy > RTL8365MB_PHYADDRMAX) + return -EINVAL; if (regnum > RTL8365MB_PHYREGMAX) return -EINVAL;
@@ -704,6 +707,8 @@ static int rtl8365mb_phy_write(struct realtek_smi *smi, int phy, int regnum, u32 ocp_addr; int ret;
+ if (phy > RTL8365MB_PHYADDRMAX) + return -EINVAL; if (regnum > RTL8365MB_PHYREGMAX) return -EINVAL;