[ Upstream commit cf18cecca911c0db96b868072665347efe6df46f ]
Some transceivers may comply with SFF-8472 even though they do not implement the Digital Diagnostic Monitoring (DDM) interface described in the spec. The existence of such area is specified by the 6th bit of byte 92, set to 1 if implemented.
Currently, without checking this bit, bnx2x fails trying to read sfp module's EEPROM with the follow message:
ethtool -m enP5p1s0f1 Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it is assumed to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM data was confirmed by Mellanox as correct and similar to other Passive DACs from other manufacturers.
Signed-off-by: Mauro S. M. Rodrigues maurosr@linux.vnet.ibm.com Acked-by: Sudarsana Reddy Kalluru skalluru@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 3 ++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index c56b61dce2d1..f4e83c86d643 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -1559,7 +1559,8 @@ static int bnx2x_get_module_info(struct net_device *dev, }
if (!sff8472_comp || - (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ)) { + (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ) || + !(diag_type & SFP_EEPROM_DDM_IMPLEMENTED)) { modinfo->type = ETH_MODULE_SFF_8079; modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; } else { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index b7d251108c19..7115f5025664 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -62,6 +62,7 @@ #define SFP_EEPROM_DIAG_TYPE_ADDR 0x5c #define SFP_EEPROM_DIAG_TYPE_SIZE 1 #define SFP_EEPROM_DIAG_ADDR_CHANGE_REQ (1<<2) +#define SFP_EEPROM_DDM_IMPLEMENTED (1<<6) #define SFP_EEPROM_SFF_8472_COMP_ADDR 0x5e #define SFP_EEPROM_SFF_8472_COMP_SIZE 1