On Sat, Mar 14, 2020 at 7:56 AM Elliott, Robert (Servers) elliott@hpe.com wrote:
-----Original Message----- From: linux-scsi-owner@vger.kernel.org <linux-scsi- owner@vger.kernel.org> On Behalf Of Sreekanth Reddy Sent: Wednesday, March 11, 2020 5:37 AM To: martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org; sathya.prakash@broadcom.com; suganath- prabu.subramani@broadcom.com; stable@vger.kernel.org; amit@kernel.org; Sreekanth Reddy sreekanth.reddy@broadcom.com Subject: [PATCH] mpt3sas: Fix kernel panic observed on soft HBA unplug
Generic protection fault type kernel panic is observed when user performs soft(ordered) HBA unplug operation while IOs are running on drives connected to HBA.
When user performs ordered HBA removal operation then kernel calls PCI device's .remove() call back function where driver is flushing out all the outstanding SCSI IO commands with DID_NO_CONNECT host byte and also un-maps sg buffers allocated for these IO commands. But in the ordered HBA removal case (unlike of real HBA hot unplug) HBA device is still alive and hence HBA hardware is performing the DMA operations to those buffers on the system memory which are already unmapped while flushing out the outstanding SCSI IO commands and this leads to Kernel panic.
Fix: Don't flush out the outstanding IOs from .remove() path in case of ordered HBA removal since HBA will be still alive in this case and it can complete the outstanding IOs. Flush out the outstanding IOs only in case physical HBA hot unplug where their won't be any communication with the HBA.
Cc: stable@vger.kernel.org Signed-off-by: Sreekanth Reddy sreekanth.reddy@broadcom.com
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 778d5e6..04a40af 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -9908,8 +9908,8 @@ static void scsih_remove(struct pci_dev *pdev)
ioc->remove_host = 1;
mpt3sas_wait_for_commands_to_complete(ioc);Immediately removing the driver with IOs pending seems dangerous.
That function includes a timeout to avoid hanging forever, which is reasonable (avoid hanging during system shutdown). Perhaps the kernel panic was happening because that function timed out?
Reporting a warning or error and doing special handling might be appropriate if that occurs. That should be rare, though; the normal case should be to cleanly finish any outstanding commands.
_scsih_flush_running_cmds(ioc);
if (!pci_device_is_present(pdev))_scsih_flush_running_cmds(ioc);If that branch is not taken, then it proceeds to remove the driver with IOs pending. That'll wipe out all sorts of ioc structures and things like interrupt handler code, leaving memory mapped forever (no code left to call scsi_dma_unmap). That might be better than a kernel panic, but still not good.
In the unload path driver call sas_remove_host() API before releasing the resources. This sas_remove_host() API waits for all the outstanding IOs to be completed. So here, indirectly driver is waiting for the outstanding IOs to be processed before releasing the HBA resources. So only in the cases where HBA is inaccessible (e.g. HBA unplug case), driver is flushing out the outstanding commands to avoid SCSI error handling over head and can quilkey complete the driver unload operation.