From: Paul Cercueil paul@crapouillou.net
[ Upstream commit 08384e80a70fb1942510ab5f0ce27bad134e634e ]
The Device Tree was using invalid node names for the ACT8600 regulators. To be fair, it is not the original committer's fault, as the documentation did gives invalid names as well.
In theory, the fix should have been to modify the driver to accept the alternative names. However, even though the act8865 driver spits warnings, the kernel seemed to work fine with what is currently supported upstream. For that reason, I think it is okay to just update the DTS.
I removed the "regulator-name" too, since they really didn't bring any information. The node names are enough.
Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Signed-off-by: Paul Cercueil paul@crapouillou.net Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/boot/dts/ingenic/ci20.dts | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 8f21d2304737c..994c7ebfddc80 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -237,59 +237,49 @@ &i2c0 { act8600: act8600@5a { compatible = "active-semi,act8600"; reg = <0x5a>; - status = "okay";
regulators { - vddcore: SUDCDC1 { - regulator-name = "DCDC_REG1"; + vddcore: DCDC1 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - vddmem: SUDCDC2 { - regulator-name = "DCDC_REG2"; + vddmem: DCDC2 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vcc_33: SUDCDC3 { - regulator-name = "DCDC_REG3"; + vcc_33: DCDC3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vcc_50: SUDCDC4 { - regulator-name = "SUDCDC_REG4"; + vcc_50: SUDCDC_REG4 { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; - vcc_25: LDO_REG5 { - regulator-name = "LDO_REG5"; + vcc_25: LDO5 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; - wifi_io: LDO_REG6 { - regulator-name = "LDO_REG6"; + wifi_io: LDO6 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; - vcc_28: LDO_REG7 { - regulator-name = "LDO_REG7"; + cim_io_28: LDO7 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - vcc_15: LDO_REG8 { - regulator-name = "LDO_REG8"; + cim_io_15: LDO8 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; vrtc_18: LDO_REG9 { - regulator-name = "LDO_REG9"; /* Despite the datasheet stating 3.3V * for REG9 and the driver expecting that, * REG9 outputs 1.8V. @@ -303,7 +293,6 @@ vrtc_18: LDO_REG9 { regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "LDO_REG10"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on;