The qrtr-mhi client driver assumes that inbound buffers are automatically allocated and queued by the MHI core, but this no happens for mhi pci devices since IPCR inbound channel is not flagged with auto_queue, causing unusable IPCR (qrtr) feature. Fix that.
Cc: stable@vger.kernel.org Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems") Signed-off-by: Loic Poulain loic.poulain@linaro.org --- drivers/bus/mhi/pci_generic.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c index 8bc6149..6d2ddec 100644 --- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -75,6 +75,22 @@ struct mhi_pci_dev_info { .doorbell_mode_switch = false, \ }
+#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \ + { \ + .num = ch_num, \ + .name = ch_name, \ + .num_elements = el_count, \ + .event_ring = ev_ring, \ + .dir = DMA_FROM_DEVICE, \ + .ee_mask = BIT(MHI_EE_AMSS), \ + .pollcfg = 0, \ + .doorbell = MHI_DB_BRST_DISABLE, \ + .lpm_notify = false, \ + .offload_channel = false, \ + .doorbell_mode_switch = false, \ + .auto_queue = true, \ + } + #define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \ { \ .num_elements = el_count, \ @@ -213,7 +229,7 @@ static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = { MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0), MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0), MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0), - MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0), + MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0), MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0), MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),