This is a note to let you know that I've just added the patch titled
tty/serial: atmel: fix out of range clock divider handling
to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
From cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 Mon Sep 17 00:00:00 2001
From: David Engraf david.engraf@sysgo.com Date: Mon, 16 Dec 2019 09:54:03 +0100 Subject: tty/serial: atmel: fix out of range clock divider handling
Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode register was already written thus the clock selection is ignored.
Fix by doing the baud rate calulation before setting the mode.
Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support") Signed-off-by: David Engraf david.engraf@sysgo.com Acked-by: Ludovic Desroches ludovic.desroches@microchip.com Acked-by: Richard Genoud richard.genoud@gmail.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/atmel_serial.c | 43 ++++++++++++++++--------------- 1 file changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a8dc8af83f39..1ba9bc667e13 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2270,27 +2270,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode |= ATMEL_US_USMODE_NORMAL; }
- /* set the mode, clock divisor, parity, stop bits and data size */ - atmel_uart_writel(port, ATMEL_US_MR, mode); - - /* - * when switching the mode, set the RTS line state according to the - * new mode, otherwise keep the former state - */ - if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { - unsigned int rts_state; - - if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { - /* let the hardware control the RTS line */ - rts_state = ATMEL_US_RTSDIS; - } else { - /* force RTS line to low level */ - rts_state = ATMEL_US_RTSEN; - } - - atmel_uart_writel(port, ATMEL_US_CR, rts_state); - } - /* * Set the baud rate: * Fractional baudrate allows to setup output frequency more @@ -2317,6 +2296,28 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
if (!(port->iso7816.flags & SER_ISO7816_ENABLED)) atmel_uart_writel(port, ATMEL_US_BRGR, quot); + + /* set the mode, clock divisor, parity, stop bits and data size */ + atmel_uart_writel(port, ATMEL_US_MR, mode); + + /* + * when switching the mode, set the RTS line state according to the + * new mode, otherwise keep the former state + */ + if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { + unsigned int rts_state; + + if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { + /* let the hardware control the RTS line */ + rts_state = ATMEL_US_RTSDIS; + } else { + /* force RTS line to low level */ + rts_state = ATMEL_US_RTSEN; + } + + atmel_uart_writel(port, ATMEL_US_CR, rts_state); + } + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN); atmel_port->tx_stopped = false;