The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0f344c8129a5337dae50e31b817dd50a60ff238c Mon Sep 17 00:00:00 2001 From: Karen Sornek karen.sornek@intel.com Date: Thu, 2 Dec 2021 12:52:01 +0100 Subject: [PATCH] i40e: Fix for failed to init adminq while VF reset
Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek grzegorzx.szczurek@intel.com Signed-off-by: Karen Sornek karen.sornek@intel.com Tested-by: Konrad Jankowski konrad0.jankowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com
diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 8d0588a27a05..1908eed4fa5e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -413,6 +413,9 @@ #define I40E_VFINT_DYN_CTLN(_INTVF) (0x00024800 + ((_INTVF) * 4)) /* _i=0...511 */ /* Reset: VFR */ #define I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT 1 #define I40E_VFINT_DYN_CTLN_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT) +#define I40E_VFINT_ICR0_ADMINQ_SHIFT 30 +#define I40E_VFINT_ICR0_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ADMINQ_SHIFT) +#define I40E_VFINT_ICR0_ENA(_VF) (0x0002C000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL(_VF) (0x0002B800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL_MSIX_INDX_SHIFT 0 #define I40E_VPINT_AEQCTL_ITR_INDX_SHIFT 11 diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 7dd2a2bab339..dfdb6e786461 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1376,6 +1376,32 @@ static i40e_status i40e_config_vf_promiscuous_mode(struct i40e_vf *vf, return aq_ret; }
+/** + * i40e_sync_vfr_reset + * @hw: pointer to hw struct + * @vf_id: VF identifier + * + * Before trigger hardware reset, we need to know if no other process has + * reserved the hardware for any reset operations. This check is done by + * examining the status of the RSTAT1 register used to signal the reset. + **/ +static int i40e_sync_vfr_reset(struct i40e_hw *hw, int vf_id) +{ + u32 reg; + int i; + + for (i = 0; i < I40E_VFR_WAIT_COUNT; i++) { + reg = rd32(hw, I40E_VFINT_ICR0_ENA(vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (reg) + return 0; + + usleep_range(100, 200); + } + + return -EAGAIN; +} + /** * i40e_trigger_vf_reset * @vf: pointer to the VF structure @@ -1390,9 +1416,11 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) struct i40e_pf *pf = vf->pf; struct i40e_hw *hw = &pf->hw; u32 reg, reg_idx, bit_idx; + bool vf_active; + u32 radq;
/* warn the VF */ - clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); + vf_active = test_and_clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states);
/* Disable VF's configuration API during reset. The flag is re-enabled * in i40e_alloc_vf_res(), when it's safe again to access VF's VSI. @@ -1406,7 +1434,19 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) * just need to clean up, so don't hit the VFRTRIG register. */ if (!flr) { - /* reset VF using VPGEN_VFRTRIG reg */ + /* Sync VFR reset before trigger next one */ + radq = rd32(hw, I40E_VFINT_ICR0_ENA(vf->vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (vf_active && !radq) + /* waiting for finish reset by virtual driver */ + if (i40e_sync_vfr_reset(hw, vf->vf_id)) + dev_info(&pf->pdev->dev, + "Reset VF %d never finished\n", + vf->vf_id); + + /* Reset VF using VPGEN_VFRTRIG reg. It is also setting + * in progress state in rstat1 register. + */ reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h index 49575a640a84..03c42fd0fea1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h @@ -19,6 +19,7 @@ #define I40E_MAX_VF_PROMISC_FLAGS 3
#define I40E_VF_STATE_WAIT_COUNT 20 +#define I40E_VFR_WAIT_COUNT 100
/* Various queue ctrls */ enum i40e_queue_ctrl {