From: Erwan Le Ray erwan.leray@foss.st.com
[ Upstream commit 315e2d8a125ad77a1bc28f621162713f3e7aef48 ]
Fifo flush set USART_RQR register by calling stm32_usart_set_bits routine (Read/Modify/Write). USART_RQR register is a write only register. So, read before write isn't correct / relevant to flush the FIFOs. Replace stm32_usart_set_bits call by writel_relaxed.
Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush") Signed-off-by: Erwan Le Ray erwan.leray@foss.st.com Link: https://lore.kernel.org/r/20210304162308.8984-11-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/stm32-usart.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 2bdd04a47f91..183c76ddb165 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -657,7 +657,7 @@ static int stm32_usart_startup(struct uart_port *port)
/* RX FIFO Flush */ if (ofs->rqr != UNDEF_REG) - stm32_usart_set_bits(port, ofs->rqr, USART_RQR_RXFRQ); + writel_relaxed(USART_RQR_RXFRQ, port->membase + ofs->rqr);
/* RX enabling */ val = stm32_port->cr1_irq | USART_CR1_RE | BIT(cfg->uart_enable_bit); @@ -762,8 +762,8 @@ static void stm32_usart_set_termios(struct uart_port *port,
/* flush RX & TX FIFO */ if (ofs->rqr != UNDEF_REG) - stm32_usart_set_bits(port, ofs->rqr, - USART_RQR_TXFRQ | USART_RQR_RXFRQ); + writel_relaxed(USART_RQR_TXFRQ | USART_RQR_RXFRQ, + port->membase + ofs->rqr);
cr1 = USART_CR1_TE | USART_CR1_RE; if (stm32_port->fifoen)