4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bhushan Shah bshah@kde.org
[ Upstream commit 03864e57770a9541e7ff3990bacf2d9a2fffcd5d ]
The kernel would not boot on the hammerhead hardware due to the following error:
mmc0: Timeout waiting for hardware interrupt. mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== mmc0: sdhci: Sys addr: 0x00000200 | Version: 0x00003802 mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000200 mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 mmc0: sdhci: Present: 0x03e80000 | Host ctl: 0x00000034 mmc0: sdhci: Power: 0x00000001 | Blk gap: 0x00000000 mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 mmc0: sdhci: Int enab: 0x02ff900b | Sig enab: 0x02ff100b mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc0: sdhci: Caps: 0x642dc8b2 | Caps_1: 0x00008007 mmc0: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000 mmc0: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000 mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc0: sdhci: Host ctl2: 0x00000008 mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x70040220 mmc0: sdhci: ============================================ mmc0: Card stuck in wrong state! mmcblk0 card_busy_detect status: 0xe00 mmc0: cache flush error -110 mmc0: Reset 0x1 never completed.
This patch increases the load on l20 to 0.2 amps for the sdhci and allows the device to boot normally.
Signed-off-by: Bhushan Shah bshah@kde.org Signed-off-by: Brian Masney masneyb@onstation.org Suggested-by: Bjorn Andersson bjorn.andersson@linaro.org Tested-by: Brian Masney masneyb@onstation.org Signed-off-by: Andy Gross andy.gross@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 ++ 1 file changed, 2 insertions(+)
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -188,6 +188,8 @@ regulator-max-microvolt = <2950000>;
regulator-boot-on; + regulator-system-load = <200000>; + regulator-allow-set-load; };
l21 {