This is a note to let you know that I've just added the patch titled
serial: sc16is7xx: remove global regmap from struct sc16is7xx_port
to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-testing branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will be merged to the tty-next branch sometime soon, after it passes testing, and the merge window is open.
If you have any questions about this process, please let me know.
From f6959c5217bd799bcb770b95d3c09b3244e175c6 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve hvilleneuve@dimonoff.com Date: Mon, 11 Dec 2023 12:13:49 -0500 Subject: serial: sc16is7xx: remove global regmap from struct sc16is7xx_port
Remove global struct regmap so that it is more obvious that this regmap is to be used only in the probe function.
Also add a comment to that effect in probe function.
Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: stable@vger.kernel.org Suggested-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Hugo Villeneuve hvilleneuve@dimonoff.com Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/sc16is7xx.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 8d1de4982b65..a4ad3ae8cae2 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -334,7 +334,6 @@ struct sc16is7xx_one {
struct sc16is7xx_port { const struct sc16is7xx_devtype *devtype; - struct regmap *regmap; struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; @@ -1434,7 +1433,8 @@ static void sc16is7xx_setup_irda_ports(struct sc16is7xx_port *s) /* * Configure ports designated to operate as modem control lines. */ -static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s) +static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s, + struct regmap *regmap) { int i; int ret; @@ -1463,7 +1463,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s)
if (s->mctrl_mask) regmap_update_bits( - s->regmap, + regmap, SC16IS7XX_IOCONTROL_REG, SC16IS7XX_IOCONTROL_MODEM_A_BIT | SC16IS7XX_IOCONTROL_MODEM_B_BIT, s->mctrl_mask); @@ -1495,6 +1495,10 @@ static int sc16is7xx_probe(struct device *dev, * This device does not have an identification register that would * tell us if we are really connected to the correct device. * The best we can do is to check if communication is at all possible. + * + * Note: regmap[0] is used in the probe function to access registers + * common to all channels/ports, as it is guaranteed to be present on + * all variants. */ ret = regmap_read(regmaps[0], SC16IS7XX_LSR_REG, &val); if (ret < 0) @@ -1530,7 +1534,6 @@ static int sc16is7xx_probe(struct device *dev, return -EINVAL; }
- s->regmap = regmaps[0]; s->devtype = devtype; dev_set_drvdata(dev, s); mutex_init(&s->efr_lock); @@ -1545,7 +1548,7 @@ static int sc16is7xx_probe(struct device *dev, sched_set_fifo(s->kworker_task);
/* reset device, purging any pending irq / data */ - regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG, + regmap_write(regmaps[0], SC16IS7XX_IOCONTROL_REG, SC16IS7XX_IOCONTROL_SRESET_BIT);
for (i = 0; i < devtype->nr_uart; ++i) { @@ -1616,7 +1619,7 @@ static int sc16is7xx_probe(struct device *dev,
sc16is7xx_setup_irda_ports(s);
- ret = sc16is7xx_setup_mctrl_ports(s); + ret = sc16is7xx_setup_mctrl_ports(s, regmaps[0]); if (ret) goto out_ports;