From: Michael Grzeschik m.grzeschik@pengutronix.de
commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760 upstream.
The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently.
It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices:
usb 1-2: can't set config #1, error -28
This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks.
Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by: Michael Grzeschik m.grzeschik@pengutronix.de Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
--- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4409,19 +4409,19 @@ static u16 xhci_calculate_u1_timeout(str { unsigned long long timeout_ns;
+ if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); + else + timeout_ns = udev->u1_params.sel; + /* Prevent U1 if service interval is shorter than U1 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) { + if (xhci_service_interval_to_ns(desc) <= timeout_ns) { dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } }
- if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); - else - timeout_ns = udev->u1_params.sel; - /* The U1 timeout is encoded in 1us intervals. * Don't return a timeout of zero, because that's USB3_LPM_DISABLED. */ @@ -4473,19 +4473,19 @@ static u16 xhci_calculate_u2_timeout(str { unsigned long long timeout_ns;
+ if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); + else + timeout_ns = udev->u2_params.sel; + /* Prevent U2 if service interval is shorter than U2 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) { + if (xhci_service_interval_to_ns(desc) <= timeout_ns) { dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } }
- if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); - else - timeout_ns = udev->u2_params.sel; - /* The U2 timeout is encoded in 256us intervals */ timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000); /* If the necessary timeout value is bigger than what we can set in the