On 26/10/2021 10:08, Wenbin Mei wrote:
While mmc0 enter suspend state, we need halt CQE to send legacy cmd(flush cache) and disable cqe, for resume back, we enable CQE and not clear HALT state. In this case MediaTek mmc host controller will keep the value for HALT state after CQE disable/enable flow, so the next CQE transfer after resume will be timeout due to CQE is in HALT state, the log as below: <4>.(4)[318:kworker/4:1H]mmc0: cqhci: timeout for tag 2 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: ============ CQHCI REGISTER DUMP =========== <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Caps: 0x100020b6 | Version: 0x00000510 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Config: 0x00001103 | Control: 0x00000001 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: TDL base: 0xfd05f000 | TDL up32: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Doorbell: 0x8000203c | TCN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Task clr: 0x00000000 | SSC1: 0x00001000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQP: 0x00000000 | CRNQDUN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQIS: 0x00000000 | CRNQIE: 0x00000000
This change check HALT state after CQE enable, if CQE is in HALT state, we will clear it.
Signed-off-by: Wenbin Mei wenbin.mei@mediatek.com Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter adrian.hunter@intel.com
drivers/mmc/host/cqhci-core.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c index ca8329d55f43..b0d30c35c390 100644 --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -282,6 +282,9 @@ static void __cqhci_enable(struct cqhci_host *cq_host) cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
- if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT)
cqhci_writel(cq_host, 0, CQHCI_CTL);- mmc->cqe_on = true;
if (cq_host->ops->enable)