From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
[ Upstream commit dfdaba27b4660ec26de955cf4459499ddb005e2d ]
The USB-C PHYs on the msm8998, QCM2290 and SM6115 platforms use special register to control which lanes of the Type-C port are used for the SuperSpeed USB connection. Mimic the qmp-combo driver and handle this register.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20240113-pmi632-typec-v2-12-182d9aa0a5b3@linaro.or... Signed-off-by: Vinod Koul vkoul@kernel.org Stable-dep-of: 01b086ccdeff ("phy: qcom: qmp-usbc: handle CLAMP register in a correct way") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 97 +++++++++++++++++++++++- 1 file changed, 94 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c index 52f1b3f7b81eb..214cf4203de41 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c @@ -18,6 +18,8 @@ #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/slab.h> +#include <linux/usb/typec.h> +#include <linux/usb/typec_mux.h>
#include "phy-qcom-qmp.h" #include "phy-qcom-qmp-pcs-misc-v3.h" @@ -374,11 +376,17 @@ struct qmp_usbc { struct reset_control_bulk_data *resets; struct regulator_bulk_data *vregs;
+ struct mutex phy_mutex; + enum phy_mode mode; + unsigned int usb_init_count;
struct phy *phy;
struct clk_fixed_rate pipe_clk_fixed; + + struct typec_switch_dev *sw; + enum typec_orientation orientation; };
static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) @@ -497,6 +505,7 @@ static int qmp_usbc_init(struct phy *phy) struct qmp_usbc *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *pcs = qmp->pcs; + u32 val = 0; int ret;
ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs); @@ -523,6 +532,14 @@ static int qmp_usbc_init(struct phy *phy)
qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
+#define SW_PORTSELECT_VAL BIT(0) +#define SW_PORTSELECT_MUX BIT(1) + /* Use software based port select and switch on typec orientation */ + val = SW_PORTSELECT_MUX; + if (qmp->orientation == TYPEC_ORIENTATION_REVERSE) + val |= SW_PORTSELECT_VAL; + writel(val, qmp->pcs_misc); + return 0;
err_assert_reset: @@ -620,23 +637,34 @@ static int qmp_usbc_power_off(struct phy *phy)
static int qmp_usbc_enable(struct phy *phy) { + struct qmp_usbc *qmp = phy_get_drvdata(phy); int ret;
+ mutex_lock(&qmp->phy_mutex); + ret = qmp_usbc_init(phy); if (ret) - return ret; + goto out_unlock;
ret = qmp_usbc_power_on(phy); - if (ret) + if (ret) { qmp_usbc_exit(phy); + goto out_unlock; + } + + qmp->usb_init_count++; +out_unlock: + mutex_unlock(&qmp->phy_mutex);
return ret; }
static int qmp_usbc_disable(struct phy *phy) { + struct qmp_usbc *qmp = phy_get_drvdata(phy); int ret;
+ qmp->usb_init_count--; ret = qmp_usbc_power_off(phy); if (ret) return ret; @@ -874,6 +902,61 @@ static int phy_pipe_clk_register(struct qmp_usbc *qmp, struct device_node *np) return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np); }
+#if IS_ENABLED(CONFIG_TYPEC) +static int qmp_usbc_typec_switch_set(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + struct qmp_usbc *qmp = typec_switch_get_drvdata(sw); + + if (orientation == qmp->orientation || orientation == TYPEC_ORIENTATION_NONE) + return 0; + + mutex_lock(&qmp->phy_mutex); + qmp->orientation = orientation; + + if (qmp->usb_init_count) { + qmp_usbc_power_off(qmp->phy); + qmp_usbc_exit(qmp->phy); + + qmp_usbc_init(qmp->phy); + qmp_usbc_power_on(qmp->phy); + } + + mutex_unlock(&qmp->phy_mutex); + + return 0; +} + +static void qmp_usbc_typec_unregister(void *data) +{ + struct qmp_usbc *qmp = data; + + typec_switch_unregister(qmp->sw); +} + +static int qmp_usbc_typec_switch_register(struct qmp_usbc *qmp) +{ + struct typec_switch_desc sw_desc = {}; + struct device *dev = qmp->dev; + + sw_desc.drvdata = qmp; + sw_desc.fwnode = dev->fwnode; + sw_desc.set = qmp_usbc_typec_switch_set; + qmp->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(qmp->sw)) { + dev_err(dev, "Unable to register typec switch: %pe\n", qmp->sw); + return PTR_ERR(qmp->sw); + } + + return devm_add_action_or_reset(dev, qmp_usbc_typec_unregister, qmp); +} +#else +static int qmp_usbc_typec_switch_register(struct qmp_usbc *qmp) +{ + return 0; +} +#endif + static int qmp_usbc_parse_dt_legacy(struct qmp_usbc *qmp, struct device_node *np) { struct platform_device *pdev = to_platform_device(qmp->dev); @@ -994,16 +1077,24 @@ static int qmp_usbc_probe(struct platform_device *pdev)
qmp->dev = dev;
+ qmp->orientation = TYPEC_ORIENTATION_NORMAL; + qmp->cfg = of_device_get_match_data(dev); if (!qmp->cfg) return -EINVAL;
+ mutex_init(&qmp->phy_mutex); + ret = qmp_usbc_vreg_init(qmp); if (ret) return ret;
+ ret = qmp_usbc_typec_switch_register(qmp); + if (ret) + return ret; + /* Check for legacy binding with child node. */ - np = of_get_next_available_child(dev->of_node, NULL); + np = of_get_child_by_name(dev->of_node, "phy"); if (np) { ret = qmp_usbc_parse_dt_legacy(qmp, np); } else {