From: Amelie Delaunay amelie.delaunay@foss.st.com
commit fac6bf87c55f7f0733efb0375565fb6a50cf2caf upstream.
When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt.
Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable stable@vger.kernel.org Acked-by: Minas Harutyunyan Minas.Harutyunyan@synopsys.com Signed-off-by: Amelie Delaunay amelie.delaunay@foss.st.com Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc2/platform.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -542,6 +542,9 @@ static int dwc2_driver_probe(struct plat ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; dwc2_writel(hsotg, ggpio, GGPIO); + + /* ID/VBUS detection startup time */ + usleep_range(5000, 7000); }
retval = dwc2_drd_init(hsotg);