From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 7ebaa41047738d46fca6376b3f1765ef69c463c5 ]
When disabling pin bias, there is no need to touch the LSI pin pull-up/down control register (PUDn), which selects between pull-up and pull-down. Just disabling the pull-up/down function through the LSI pin pull-enable register (PUENn) is sufficient.
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Niklas Söderlund niklas.soderlund+renesas@ragnatech.se Link: https://lore.kernel.org/r/071ec644de2555da593a4531ef5d3e4d79cf997d.162506407... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/renesas/pinctrl.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c index bb488af29862..85cb78cfcfa6 100644 --- a/drivers/pinctrl/renesas/pinctrl.c +++ b/drivers/pinctrl/renesas/pinctrl.c @@ -898,17 +898,17 @@ void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
if (reg->puen) { enable = sh_pfc_read(pfc, reg->puen) & ~BIT(bit); - if (bias != PIN_CONFIG_BIAS_DISABLE) + if (bias != PIN_CONFIG_BIAS_DISABLE) { enable |= BIT(bit);
- if (reg->pud) { - updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); - if (bias == PIN_CONFIG_BIAS_PULL_UP) - updown |= BIT(bit); + if (reg->pud) { + updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); + if (bias == PIN_CONFIG_BIAS_PULL_UP) + updown |= BIT(bit);
- sh_pfc_write(pfc, reg->pud, updown); + sh_pfc_write(pfc, reg->pud, updown); + } } - sh_pfc_write(pfc, reg->puen, enable); } else { enable = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);