From: Alexander Sverdlin alexander.sverdlin@nokia.com
Spansion S25FS-S family has an issue in Basic Flash Parameter Table: DWORD-11 bits 7-4 specify write page size 512 bytes. In reality this is configurable in the non-volatile CR3NV register and even factory default configuration is "wrap at 256 bytes". So blind relying on BFPT breaks write operation on these Flashes.
All this story is vendor-specific, so add the corresponding fixup hook which first restores the safe page size of 256 bytes from struct flash_info but checks is more performant 512 bytes configuration is active and adjusts the page_size accordingly.
Cc: stable@vger.kernel.org Fixes: f384b352c ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables") Signed-off-by: Alexander Sverdlin alexander.sverdlin@nokia.com --- drivers/mtd/spi-nor/spi-nor.c | 39 +++++++++++++++++++++++++++++++++++++-- include/linux/mtd/spi-nor.h | 5 +++++ 2 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 73172d7..18f8705 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1711,6 +1711,39 @@ static struct spi_nor_fixups mx25l25635_fixups = { .post_bfpt = mx25l25635_post_bfpt_fixups, };
+/* Spansion S25FS-S SFDP workarounds */ +static int s25fs_s_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + const struct flash_info *info = nor->info; + u8 read_opcode, buf; + int ret; + + /* Default is safe */ + params->page_size = info->page_size; + + /* + * But is the chip configured for more performant 512 bytes write page + * size? + */ + read_opcode = nor->read_opcode; + + nor->read_opcode = SPINOR_OP_RDAR; + ret = nor->read(nor, SPINOR_REG_CR3V, 1, &buf); + if (!ret && (buf & CR3V_02H_V)) + params->page_size = 512; + + nor->read_opcode = read_opcode; + + return ret; +} + +static const struct spi_nor_fixups s25fs_s_fixups = { + .post_bfpt = s25fs_s_post_bfpt_fixups, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -1903,7 +1936,8 @@ static const struct flash_info spi_nor_ids[] = { SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, - { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) }, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) + .fixups = &s25fs_s_fixups, }, { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | @@ -1913,7 +1947,8 @@ static const struct flash_info spi_nor_ids[] = { { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, - { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, + { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) + .fixups = &s25fs_s_fixups, }, { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index b3d360b..222eee9 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -114,6 +114,7 @@ /* Used for Spansion flashes only. */ #define SPINOR_OP_BRWR 0x17 /* Bank register write */ #define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ +#define SPINOR_OP_RDAR 0x65 /* Read Any Register */
/* Used for Micron flashes only. */ #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ @@ -149,6 +150,10 @@ /* Status Register 2 bits. */ #define SR2_QUAD_EN_BIT7 BIT(7)
+/* Used for Spansion flashes RDAR command only. */ +#define SPINOR_REG_CR3V 0x800004 +#define CR3V_02H_V BIT(4) /* Page Buffer Wrap */ + /* Supported SPI protocols */ #define SNOR_PROTO_INST_MASK GENMASK(23, 16) #define SNOR_PROTO_INST_SHIFT 16