Add a quirk XHCI_ZHAOXIN_HOST for zhaoxin xhci to fix issues, there are two cases will be used. - add u1/u2 support. - fix xHCI root hub speed show issue in zhaoxin platform.
Add a quirk XHCI_ZHAOXIN_TRB_FETCH to fix TRB prefetch issue.
On Zhaoxin ZX-100 project, xHCI can't work normally after resume from system Sx state. To fix this issue, when resume from system sx state, reinitialize xHCI instead of restore. So, Add XHCI_RESET_ON_RESUME quirk for zx-100 to fix issue of resuming from system sx state.
Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang WeitaoWang-oc@zhaoxin.com --- v1->v2 - Add more quirks of xhci for zhaoxin.
drivers/usb/host/xhci-pci.c | 11 +++++++++++ drivers/usb/host/xhci.h | 2 ++ 2 files changed, 13 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 6db07ca419c3..53b7d8a1ed0a 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -334,6 +334,17 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4)) xhci->quirks |= XHCI_NO_SOFT_RETRY;
+ if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) { + xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_ZHAOXIN_HOST; + if (pdev->device == 0x9202) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + } + if (pdev->device == 0x9203) + xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + } + /* xHC spec requires PCI devices to support D3hot and D3cold */ if (xhci->hci_version >= 0x120) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 786002bb35db..8f8f0e91b0dc 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1905,6 +1905,8 @@ struct xhci_hcd { #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) +#define XHCI_ZHAOXIN_HOST BIT_ULL(45) +#define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(46)
unsigned int num_active_eps; unsigned int limit_active_eps;