5.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Szyprowski m.szyprowski@samsung.com
commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.
Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") added MMC power sequence for eMMC card of Odroid X2/U3. It reused generic sd1_cd pin control configuration node and only disabled pull-up. However that time the pinctrl configuration was not applied during MMC power sequence driver initialization. This has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to proper platform device").
It turned out then, that the provided pinctrl configuration is not correct, because the eMMC_RTSN line is being re-configured as 'special function/card detect function for mmc1 controller' not the simple 'output', thus the power sequence driver doesn't really set the pin value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this by providing separate node with eMMC_RTSN pin configuration.
Cc: stable@vger.kernel.org Reported-by: Markus Reichl m.reichl@fivetechno.de Suggested-by: Ulf Hansson ulf.hansson@linaro.org Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -49,7 +49,7 @@ };
emmc_pwrseq: pwrseq { - pinctrl-0 = <&sd1_cd>; + pinctrl-0 = <&emmc_rstn>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; @@ -165,12 +165,6 @@ cpu0-supply = <&buck2_reg>; };
-/* RSTN signal for eMMC */ -&sd1_cd { - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; -}; - &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; @@ -188,6 +182,11 @@ samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; }; + + emmc_rstn: emmc-rstn { + samsung,pins = "gpk1-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; };
&ehci {