From: Jerome Brunet jbrunet@baylibre.com
[ Upstream commit 59c6a3a43b221cc2a211181b1298e43b2c2df782 ]
According to Amlogic datasheets for the SoCs supported by this driver, the maximum bit clock rate is 100MHz.
The tdm interface allows the rates listed by the DAI driver, regardless of the number slots or their width. However, these will impact the bit clock rate.
Hitting the 100MHz limit is very unlikely for most use cases but it is possible.
For example with 32 slots / 32 bits wide, the maximum rate is no longer 384kHz but ~96kHz.
Add the constraint accordingly if the component is not already active. If it is active, the rate is already constrained by the first stream rate.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet jbrunet@baylibre.com Link: https://msgid.link/r/20240223175116.2005407-3-jbrunet@baylibre.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/meson/axg-tdm-interface.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c index cd5168e826df4..2cedbce738373 100644 --- a/sound/soc/meson/axg-tdm-interface.c +++ b/sound/soc/meson/axg-tdm-interface.c @@ -12,6 +12,9 @@
#include "axg-tdm.h"
+/* Maximum bit clock frequency according the datasheets */ +#define MAX_SCLK 100000000 /* Hz */ + enum { TDM_IFACE_PAD, TDM_IFACE_LOOPBACK, @@ -153,19 +156,27 @@ static int axg_tdm_iface_startup(struct snd_pcm_substream *substream, return -EINVAL; }
- /* Apply component wide rate symmetry */ if (snd_soc_component_active(dai->component)) { + /* Apply component wide rate symmetry */ ret = snd_pcm_hw_constraint_single(substream->runtime, SNDRV_PCM_HW_PARAM_RATE, iface->rate); - if (ret < 0) { - dev_err(dai->dev, - "can't set iface rate constraint\n"); - return ret; - } + + } else { + /* Limit rate according to the slot number and width */ + unsigned int max_rate = + MAX_SCLK / (iface->slots * iface->slot_width); + ret = snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + 0, max_rate); }
- return 0; + if (ret < 0) + dev_err(dai->dev, "can't set iface rate constraint\n"); + else + ret = 0; + + return ret; }
static int axg_tdm_iface_set_stream(struct snd_pcm_substream *substream,