From: Andrey Skvortsov andrej.skvortzov@gmail.com
commit 379f56c24e698f14242f532b1d0a0f1747725e08 upstream.
SD card is allowed to signal busy on DAT0 up to 1s after the CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host waits until busy of CMD49 is released and only then polls Power Management Status register up to 1s until the card indicates ready to power off.
Without waiting for busy before polling status register sometimes card becomes unresponsive and system fails to suspend:
[ 205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command [ 206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed [ 206.421347] mmc0: error -110 reading status reg of PM func [ 206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110 [ 206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110 [ 206.437064] PM: Some devices failed to suspend, or early wake event detected
Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system.
Signed-off-by: Andrey Skvortsov andrej.skvortzov@gmail.com Fixes: 2c5d42769038 ("mmc: core: Add support for Power Off Notification for SD cards") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/core/sd.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -67,7 +67,7 @@ static const unsigned int sd_au_size[] = __res & __mask; \ })
-#define SD_POWEROFF_NOTIFY_TIMEOUT_MS 2000 +#define SD_POWEROFF_NOTIFY_TIMEOUT_MS 1000 #define SD_WRITE_EXTR_SINGLE_TIMEOUT_MS 1000
struct sd_busy_data { @@ -1664,6 +1664,12 @@ static int sd_poweroff_notify(struct mmc goto out; }
+ /* Find out when the command is completed. */ + err = mmc_poll_for_busy(card, SD_WRITE_EXTR_SINGLE_TIMEOUT_MS, false, + MMC_BUSY_EXTR_SINGLE); + if (err) + goto out; + cb_data.card = card; cb_data.reg_buf = reg_buf; err = __mmc_poll_for_busy(card, SD_POWEROFF_NOTIFY_TIMEOUT_MS,